English 11

-- AT893/AT890/AT753/AT752/AT750: When the battery is fully charged, the charging light lights up green continuously.

Note: After approx. 30 minutes, the charging light goes out to save energy.

Charging with the adapter

1Put the small plug in the shaver.

2Put the adapter in the wall socket.

,, The charging light shows the charging status of the shaver (see section ‘Charge indications’ in this chapter).

Charging in the charging stand (AT940/ AT921 only)

1Put the small plug in the charging stand.

2Put the adapter in the wall socket.

3Place the shaver in the charging stand.

,, The charging light shows the charging status of the shaver (see section ‘Charge indications’ in this chapter).

Using the shaver

Note:This shaver can be used in the bath or shower. It can therefore not be used directly from the mains for safety reasons.

Page 11
Image 11
Philips manual Charging with the adapter, Charging in the charging stand AT940/ AT921 only, Using the shaver