Philips AX6301 warranty Maintenance, Enviromental information, Accessories, Headphones HE035

AX6301_01 eng(april) 4/29/2004 03:04 PM Page 1

Portable VCD MP3-CD Player	6301
	AX

Meet Philips at the Internet

http://www.philips.com

English

∑

AX6301

CLASS 1

LASER PRODUCT

NM/JW 0418

GENERAL INFORMATION

Maintenance

• Do not touch the lens A of the player.

• Do not expose the unit, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment, or direct sunshine).

• You can clean the player with soft, slightly dampened and lint-free cloth. Do not use any cleaning agents, as they may be corrosive.

•To clean the CD, wipe it in a straight line from the center toward the edge using soft, lint-free cloth.

•Never write on a disc or attach a sticker to it.

•Discs and lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Leave the player in a warm environment until the moisture has evaporated.

•Active mobile phones in the vicinity may cause malfunctions.

•Avoid dropping the unit as this may cause damage.

Enviromental information

•We have done our best to make the packaging easily separable into mono materials. Cardboard (box) and polyethylene (bags, protective foam sheet).

•Your set consists of materials which can be recycled if disassembled by a spe- cialized company. Please observe the local regulations regarding the disposal of packing material, exhausted batteries and old equipment.

Accessories

Headphones, HE035

Mains adapter, AY3193

Wireless remote control, AY3788

AV cable, AY3484

Headphones (HE035)

• Connect the supplied headphones to LINE OUT/p.

LINE O

UT /

TIP:

LINE OUT/ p. can also be used to connect this set to your HiFi or TV system.

Take care when using headphones

Hearing safety

Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing.

Traffic safety

Do not use your headphones while driving a vehicle. It may create a hazard and it is illegal in many countries.

English

CONTROLS

POWER SUPPLY/GENERAL INFORMATION

PLAYBACK

FEATURES

FEATURES

AUSTRALIA

Controls

Batteries (not included)

Playing a disc

Special features for VCD playback only

Return

Philips 3 years Manufacturers Warranty for Australia only

1 OPEN 2 ..............to open the VCD MP3 CD lid

Inserting batteries

With this set, you can play

Adjusting your TV System

If you want to return to MENU PLAY (the main menu at the

These warranty conditions are valid for the following consumer electronics

products: Colour Televisions, Video Cassette Recorders, CD Players and

2 VOL E .............to adjust the volume

• Open the battery compartment and insert 2 alka-

- Video discs

Before viewing the Video CD, ensure that the set is switched to the corre-

beginning of your VCD) during SEQUENCE PLAY, press

RETURN

Recorders, DVD Players and Recorders, Audio Systems and Portable Audio.

3 2; ........................to switch the player on, start playback and interrupt playback

line batteries of type AA (LR6, UM3).

- audio discs (pre-recorded audio CDs, finalized audio

RETURN.

The benefits given to the purchaser by this warranty are in addition to all

sponding PAL or NTSC system of your TV set (except multi-system TV).

4 ESP ......................to switch on /off ESP function

• When using the remote control for the first time,

CDs and CD-RWs)

other rights and remedies which the purchaser has in respect of the product

1 Connect the audio/video output cable to the corresponding ports of the TV set.

5 DBB.................. ...to select bass enhancement

please remove the clear protective tab from the

- MP3-CDs (CD-ROMs with MP3 files)

under the Trade Practices Act or other Commonwealth or State Law.

6 § ........................to skip forward and search forward for CD and MP3-CD

battery.

For VCD playback, you need to connect the player to

2 Turn on your TV system and adjust the input mode to AV

Philips Consumer Electronics warrants its products to the purchaser as follows

..............................to skip forward for VCD

• Do not mix old and new or different types of batteries.

your TV (see Connecting to your TV system)

3 On the remote control, press P/N to toggle between PAL and NTSC TV systems.

Go to

and subject to the stated conditions.

3 YEARS free Repair Service

7 + ..........................to select the desired album up for MP3-CD playback

Indication of empty batteries

1 Push the OPEN 2 slider to open the disc lid.

OSD - On Screen Display

1 Press GO TO on the remote control.

Colour Televisions, CD Players and Recorders, DVD Players and Recorders and

..............................to fast forward during VCD playback

• Replace the batteries or connect the mains adapter as soon as

. blinks.

2 Insert a disc, printed side up, by pressing the CD onto

➜ GO TO--:--appears on the TV screen.

Audio Systems.

GO TO

3 YEARS free Replacement – at your Retailer

8 DISPLAY..............(for CD and VCD) to display the current track number and

• Remove batteries if they are empty or the set will not be used for a long time.

the hub. Close the lid by pressing the lid down.

If you insert a VCD, your TV screen will serve as an additional display for

Enter the desired time from which you want to start playback.

All Portable Audio products and all Video Cassette recorders (VCR’s) only.

remaining / elapsed playing time. (for MP3-CD) to display

Average playing time of batteries under normal

conditions

3 Press 2; on the set to start playback.

the current album number, track number, remaining/elapsed

messages (e.g. PLAY, STOP) and information stored in the VCD.

2 Press GO TO again to deactivate GO TO.

Conditions of Repair Warranty

playing time.

Alkaline battery

ESP on

ESP off

➜ Playback starts.

• Press OSD on the remote control or DISPLAY on the set repeatedly to switch

1. All claims for warranty service should be made to your nearest Philips Authorised

9 Display

➜ GO TO CANCEL appears.

Video disc:

OSD on or off.

Service Centre. Reasonable evidence of date of purchase must be provided.

0 − ...........................to select the desired album down for MP3-CD playback

VCD

3 hours

3.5 hours

appears. The current track number

2. This warranty extends only to defects in material or workmanship occurring under

When OSD is switched on, your TV screen may for example display the follow-

..............................to fast rewind during VCD playback

CD

7 hours

7.5 hours

and the elapsed time are displayed.

ing

View

normal use of the product when operated in accordance with the instructions.

3. This warranty applies for original purchase only. It is not transferable if sold.

! ∞ .........................to skip backward and search backward for CD and MP3-CD

Audio disc: The current track number and the elapsed

XX-MM:SS - where:

4. Home service within the normal service area of one of our Authorised Service

MP3-CD

9.5 hours

This feature allows you to scan through your VCD in 9

..............................to skip backward for VCD

playing time are displayed.

– “XX" is the current track

Centres will only be provided for television receivers with screen size 48 cm

@ OFF·RESUME·HOLD·

MP3-CD: MP3 appears. The current album number, track number and the

– "MM" is for minute.

segments.

VIEW

and above. All other products are to be taken or sent to the workshop of your

– OFF ...................switches RESUME and HOLD off

Batteries contain chemical substances, so they should be disposed of

– "SS" is for second.

￿

1

Press VIEW to divide the whole movie of the video into 9

nearest Authorised Service Centre (at Consumer’s expense).

elapsed playing time are displayed.

– RESUME ..........stores and starts at the last position played

properly.

4 To stop playback, press 9.

OSD

segments.

5. This Manufacturers Warranty is limited to 3 months for above listed Consumer

– HOLD................locks all buttons on the set except the volume control slider

Electronics products if used in commercial applications.

➜ The 7-second of each segment is played. After the last

# 9 (STOP)...............to stop playback, clear a program and switch the set off

Video disc: The number of tracks and the total playing time of the disc are

6. Philips may, at its discretion choose to replace rather than repair any product

Mains adapter (supplied AY3193)

segment, playback starts from the first segment.

covered by this warranty.

$ PROGRAM ..........to program tracks

Use only the AY3193 adapter (DC: 4.5V/500mA; AC:

displayed.

2 Select your desired segment using the number buttons on the remote control.

7. This Manufacturers Warranty is neither transferable nor valid in countries other

% MODE .............. ...to select playback options - REPEAT 1, REPEAT ALL,

Audio disc: The number of tracks and the total playing time of the disc are

➜ Playback continues from the selected segment.

than Australia.

SCAN and SHUFFLE

110V/220V and 50/60Hz). Any other product may

displayed.

This warranty does not cover:

^ LINE OUT/p..........to connect

damage the player.

3 Press VIEW again or 2; to resume normal playback.

MP3-CD:The number of albums and the number of tracks are displayed.

a) Mileage or travelling time, pickup or delivery, installations and cost of insurance.

..............................- headphones

1 Make sure the mains voltage matches the voltage

b) Mileage or travel outside the normal service area covered by selected

- the set to the audio/video input of your stereo equipment

.

requirement of the mains adapter.

Authorised Service Centre.

& infrared sensor for the remote control

2 Connect the mains adapter to the 4.5V DC socket of

c) Service costs arising from failure to correctly adjust the controls of the

* 4.5V DC

...............to connect the mains adapter

the player and to the wall socket.

product or to observe the instructions, or inspections that reveal that the

product is in normal working order.

( Battery compartment

d) Product failures caused by misuse, neglect, accidental breakage, transit

TIP:

Playing a disc

DISPLAY features for VCD, CD and MP3-CD

Zoom

1

) Type plate

5 Press 9 again to switch off the player.

1

damage, inexpert repairs or modification by un-authorised persons, external

*

OSD

-

Always disconnect the adapter when you are not using it.

• During normal playback, you can press OSD on the remote control or

Press ZOOM on the remote control once to enlarge the picture by 2 times.

fires, lightning strikes, floods, vermin infestation or liquid spillage.

(

Remote Control

-

Once the mains adapter is connected, the power supply from batteries will

• To remove the disc, hold it by its edge and press the hub

DISPLAY on the set repeatedly to select your desired display.

➜

ZOOM 2" appears.

e) Cleaning of video or audio heads.

&

MODE

2

be switched off automatically.

gently while lifting the disc.

2 Press ZOOM again to quit the zoom feature.

ZOOM

f) Inadequate receiving antennae.

^

1 OSD .....................(for CD and VCD) to display the current track number and

➜ RESTORE appears and normal playback resumes.

g) Replacement of worn or used batteries or other consumables.

3

remaining / elapsed playing time. (for MP3-CD) to display

TV connection

%

4

the current album number, track number, remaining/elapsed

TIP:

Press OSD or DISPLAY

Display

h) Consumer products used in commercial applications

(This warranty is limited to 3 months only).

PROG

playing time.

Connecting to your TV System

- You can only press 2; on the set to start

1x

Track number + track’s remaining playing time

Slow

i) Second hand products.

1

2

3

R/L

5

2 MODE .................to select the playback options: REPEAT 1, REPEAT ALL,

playback.

2x

Normal display

Select from 4 speeds to capture action in slow motion: 1/2, 1/4, 1/8, and 1/16.

The conditions contained in this warranty card replace and override the

SCAN and SHUFFLE

- if there is no activity, the player will automatically switch off

in 30 seconds to

1 Press SLOW on the remote control once or more for playback at slow speed.

provision of the Philips World-Wide Guarantee for products purchased in

Front view

4

5

6

3 § ........................to skip forward for CD, VCD and MP3-CD

save energy.

➜ Sound is muted and SLOW1/2, SLOW1/4, SLOW1/8 or

Australia and used in Australia.

- After pressing 2;, you may need to wait for 10 seconds or more until the

4 PROG ...................for CD/VCD/MP3-CD, to program disc tracks

SLOW1/16 is displayed.

SLOW

Philips Authorised Service Centres

6

first MP3 track is played.

2 To resume normal playback, press 2;.

Service is provided through 200 accredited Authorised Service Centres

7

8

9

10/0

5 R/L........................to toggle between left/right channels and stereo

throughout Australia. For direct contact with your nearest recommended

LINE OUT

p

Authorised Service Centre in major cities:

6 Number buttons to select your desired tracks

Adelaide

Launceston

Pause

Playing a VCD V2.0 with PBC

$

RESUME

VIEW

ZOOM

P/N

7

7 P/N.......................to toggle between PAL and NTSC

Brisbane

Melbourne

1 Press 2; to interrupt playback.

PBC is a predefined play sequence stored in the CD.

Canberra

Newcastle

#

8

8 ZOOM .................to view pictures in an enlarged mode

➜ The track number and the elapsed playing time are displayed.

SEQUENCE PLAY is by default on when VCD playback starts.

Geelong

Perth

SLOW

RETURN

GO TO

PBC

9 PBC .....................to toggle between MENU Play and SEQUENCE PLAY

2

Gold Coast

Sydney

Press 2; again to resume playback

Before viewing your VCD, make sure the set is switched to the corresponding

Hobart

Wollongong

0 GO TO .................to set the time from which playback starts

Use the supplied AV cable to connect the player to your TV system. To ensure

or to find the location of your nearest recommended Authorised Service Centre

@

!

0

9

! RETURN .............to return to MENU PLAY from SEQUENCE PLAY

TIP:

PAL or NTSC system of your TV set (except multi-system TVs).

outside the above cities please call our National Service telephone number:

uninterrupted viewing, we recommend you use AC mains power for your play-

1 Press P/N repeatedly to select PAL or NTSC.

1300 361 392

@ SLOW .................to view VCDs at a slower speed

er during VCD operation.

P/N

- If the set stays in the PAUSE mode for more than 90 seconds, it will enter the

Please record the following information for your records and keep in a safe place.

1 Insert the yellow video cable pin into the VIDEO IN jack on the rear of your TV.

➜

is displayed when you load a VCD with PBC

# VIEW ..................to scan VCD segments

STOP mode automatically. After 30 seconds or more in the STOP mode, your

Model number:

Insert the white and red audio cable pins respectively into the left and right

(Playback Control) into your player.

RELEASE

1xCR2025

$ RESUME ............to resume playback in stop mode

AUDIO IN jacks of your TV.

set automatically powers down.

2 You can press PBC to toggle between MENU PLAY and

Serial number:

Date of purchase:

% ∞ ........................to skip backward for CD, VCD and MP3-CD

2 Insert the pin on the other end of the AV cable into the LINE OUT p jack on

PBC

3V lithium battery

SEQUENCE PLAY.

Retailer:

^ 9 (STOP) ...............to stop playback or clear a program

your player.

➜ If SEQUENCE PLAY is selected, the playback starts from

We recommend you retain your purchase receipt to assist in any

& − ..........................to select the desired album down for MP3-CD playback

3 Connect the mains adapter to the 4.5V DC socket of the player and to the wall

the beginning of the first track.

warranty claim.

PUSH

socket.

➜ If MENU PLAY is selected, a list of tracks is displayed on the TV screen.

Philips Consumer Electronics

..............................to fast rewind during VCD playback

a division of Philips Electronics Australia Limited

PULL

* 2; ........................to start /pause playback / return to normal playback

TIP:

ABN 24 008 445 743,

Back view

Level 2, 65 Epping Road NORTH RYDE NSW 2113

( + ...........................to select the desired album up for MP3-CD playback

This function is not available for discs without Table Of Contents.

3 year Warranty valid for all new products purchased after 1st July 2002

..............................to fast forward during VCD playback

GENERAL INFORMATION

GENERAL INFORMATION/FEATURE

FEATURES

FEATURES

FEATURES

TROUBLESHOOTING

NEW ZEALAND

General MP3 information

Volume and sound

Selecting and searching on all discs

RESUME and HOLD

Programming track numbers

Guarantee and Service for New Zealand

MP3 music files

Volume adjustment

Selecting a track during playback

You can interrupt playback and continue (after a short

You can select up to 20 tracks and store them in the

WARNING: Under no circumstances should you try to repair the set yourself

Thank-you for purchasing this quality Philips product.

The music compression technology MP3 (MPEG Audio Layer 3) reduces the

• Adjust the volume by using the volume control

• Briefly press ∞ or § once or several times to skip to the beginning of the

while at the stop position only) from the position

memory in a desired sequence. You can store any

as this will invalidate the guarantee.

digital data of an audio CD significantly while maintaining CD-like sound quality.

VOL E.

previous or subsequent track.

where playback has stopped (RESUME). You can also

track more than once.

If a fault occurs, first check the points listed below before taking the set for

Philips New Zealand Ltd guarantees this product against defective components

With MP3 you can record up to 10 hours of CD-like music on a single CD-RW.

➜ Playback continues with the selected track .

lock all buttons of the set so that no action will be

1 In the stop mode, press PROGRAM on the set or PROG

repair. If you are unable to solve a problem by following these hints, consult

and faulty workmanship for a period of 12 months. Any defect in materials or

executed (HOLD). Use the OFF – RESUME – HOLD

workmanship occurring within 12 months from the date of purchase subject to the

How to get music files

on the remote control.

your dealer or service centre.

Searching for a passage during CD playback

slider for these functions.

following conditions will be rectified free of charge by the retailer from whom this

Either download legal music files from the Internet to your computer hard disc

Sound adjustment

➜ PROGRAM appears and P with the number of

1 Keep ∞ or § pressed to find a particular passage in

RESUME – continuing from where you have stopped

Problems

product was purchased.

or create them from your own audio CDs. For this, insert an audio CD into your

1 Press DBB for a moderate bass enhancement.

stored tracks is displayed.

computer's CD-ROM drive and convert the music using appropriate encoder

a backward or forward direction.

1 Switch the slider to RESUME during playback to activate RESUME.

2 Select a track with ∞ or §.

No sound/power

Conditions

➜

DBB

appears.

software. To achieve good sound quality, a bit rate of 128 kbps or higher is

➜

Searching is started.

y RESUME is shown.

3 Press PROGRAM on the set or PROG on the remote

• Check if the player is connected securely.

1. The product must have been purchased in New Zealand.As proof of purchase,

Press DBB again to switch off the bass enhancement.

2 Release the button at the desired passage.

recommended for MP3 music files.

2

Press 9.

RESUME

• Check volume on the player.

retain the original sales docket indicating the date of purchase.

control to store the track.

➜

DBB

➜

Normal playback continues.

How to organize music files

disappears.

3 Press 2; on the set or press 2; or RESUME on the

• Disconnect headphones when not using headphones.

4 Select and store all desired tracks in this way.

2. The guarantee applies only to faults caused by defective components, or faulty

remote control to resume playback.

•

Make sure you operate the TV or amplifier correctly.

In order to easily handle the large number of music files on a CD-ROM, you

y RESUME is shown and playback continues from where

5 Press 2; to start playback of the program

•

Make sure you have selected VCD player position on the amplifier.

workmanship on the part of the manufacturer.

can organize them in folders ("albums").

Selecting albums and tracks on MP3-CDs

you have stopped.

➜

Playback starts.

•

The power circuit in your player is designed with a power shutdown mode.

The tracks of an album will be played in alphabetical order. If you want to

RESUME

3. The guarantee does not cover failures caused by misuse, neglect, normal wear

Selecting an album during playback

• To deactivate RESUME, switch the slider to OFF.

This is activated only during battery power operation of the player when the

arrange them in a certain order, let the file names start with numbers.

and tear, accidental breakage, use onthe incorrect voltage, use contrary to

R/L : Channel and stereo sound selection

For example:

• Briefly press − or + once or several times to skip to the first track of the cur-

y RESUME goes off.

TIP:

battery becomes completely drained. When this happens:

1

Connect your player to AC power with the supplied mains adapter.

operating instructions, or unauthorised modification to the product or repair by

It is possible to select the right channel or left channel or stereo from a multi-

rent, previous or subsequent album.

PROGRAM

001-EWORLD.MP3

➜ Playback starts from the first track of the

–

P-FULLappears when the program memory is full.

2 Let the player stand idle for 30 seconds before switching on again to resume

an unauthorised technician.

002-FIRESTARTER.MP3

channel disc when you connect your player to your TV or Hi-Fi system.

TIP:

disc operation on AC power supply.

003-DEEP.MP3

1 For VCDs, make sure you connect the player correctly to your TV system first.

selected album.

Loud noise when operating the player

4. Reasonable evidence (in the form of a sales docket) must be supplied to

Albums will be arranged in alphabetical order, but subfolders (albums within

• For music discs, make sure you connect the player to your

Selecting a track during playback

– Resume is also cancelled if you have opened the disc lid or disconnected

indicate that the product was purchased no more than 12 months prior to the

another album) will be played immediately after the album in which they are

Hi-Fi system first.

1 Briefly press ∞ or § once or several times to

your player from the power supply.

•

This is normal and due to mechanical parts. Playback is not affected.

date of your claim.

located. Albums without MP3 files will be skipped.

2 On the remote, press R/L once or more to select your sound output option.

The player feels very warm

select previous or subsequent tracks within the cur-

HOLD - locking all buttons

5. In the event of a failure, Philips shall be under no liability for any injury, or any

If there are MP3 files which you did not put into an album, you will find them

rent album.

• Switch the slider to HOLD to activate HOLD.

•

When the player is in use for a long period of time, the surface will be heated.

loss or damage caused to property or products other than the product under

in the album VARIOUS with album number 0. VARIOUS is the first album that

2 Release the button at the desired track.

This is normal.

R/L

➜ HOLD appears and all buttons are locked.

HOLD

guarantee.

will be played.

➜ Playback continues with the selected track.

No picture / No color on TV screen

When any key is pressed, HOLd is displayed.

This guarantee does not prejudice your rights under common law and statute,

•

Connect the cable between the systems and the TV.

• To deactivate HOLD, switch the slider to OFF.

•

Change the system to the respective PAL or NTSC setting.

and is in addition to the normal responsibilities of the retailer and Philips.

➜ HOLD disappears.

My disc cannot play

How to claim

General MP3 information

Selecting tracks using the number digits

Playing tracks repeatedly or in a random order - MODE

ESP - Electronic Skip Protection

Clearing the program

How to make a CD-ROM with MP3 files

• Press number buttons 0-9on the remote control to select your desired track.

Press MODE once or several times to select the

The ESP duration is 120 seconds for CD playback,

You can clear the program by

•

Check you have loaded a disc in the player if empty.

Should your Philips product fail within the guarantee period, please return it to

•

Check you have loaded a disc properly with the label side up.

the retailer from whom it was purchased. In most cases the retailer will be able

Use your computer's CD burner to record ('burn") music files from your hard

If more than 10 tracks are stored in a disc, you can use 10+:

desired playback possibility.

400 seconds for MP3 disc playback and

• pressing 9 again in th stop mode;

•

Disc dirty/damaged. Clean the disc properly.

to satisfactorily repair or replace the product.

disc on a CD-ROM. Use ISO9660 disc format.

• Press 10+ first, and then the last number.

–

REPEAT 1:

30 seconds for VCD playback.

• powering off the player;

•

Moisture has condensed in the player.

However, should the retailer not be able to conclude the matter satisfactorily, or if

Make sure that the file names of the MP3 files end with .mp3

• Press 10+ once for 10+, twice for 20+, and three times for 30+, and so on.

The current track is played repeatedly.

The ELECTRONIC SKIP PROTECTION system prevents sound loss or unstable

• opening the disc lid;

Remove the disc and leave the player to adjust to the surrounding temperature.

you have other difficulties claiming under this guarantee, please contact

• pressing and holding PROGRAM during playback

Note: Data compression in UDF is not supported.

–

REPEAT ALL:

playback caused by light vibrations and shocks. Continuous playback is thus

Some audio CDs available on the market are copy protected. These discs will not

ensured. ESP does not prevent playback interruptions during vigorous

• pressing PROG on the remote control during playback.

play on this set. See your retailer for options regarding non-protected audio CDs.

The Guarantee Controller

The entire disc is played repeatedly. But forMP3-

running. It does not protect the unit against any damage caused by

•

Make sure the MP3-CD was recorded within 32-320kbps (128kbps

Philips New Zealand Ltd.

Searching VCDs at different fast / slow speeds during

CDs, only all the tracks in the current album are

dropping!

preferably) with sampling frequencies at 8-48KHz (44.1KHz preferably).

4 P.O. Box 41.021

playblack

played repeatedly.

REPEAT 1 ALL

Supported formats

Press ESP repeatedly during playback to toggle between ESP ON and ESP OFF.

Picture hangs / poor picture quality during VCD playback

Auckland

• Press + once or several times to select your desired forwarding speed:

–

SHUFFLE:

•

When

appears, ESP is activated.

This set supports:

All tracks are played in a random order.

•

VCD disc error operation.

3 (09) 84 94 160

Press

Times of normal speed

- Video CD V1.0, Video CD V2.0

–

SCAN :

•

When

disappears, ESP is deactivated

M P3

•

Deactivate ESP, if activated, to correct picture playback.

fax 3 (09) 84 97 858

- ISO-9660, ISO-9660+Joliet, Joliet, Packet writing

1x

FORWARD x1

SHUFFLE

ALBUM

•

Press

9 then 2; to restart playback.

The first 10 seconds of each track is played in

- MP3 bit rate: 32-320 kbps and variable bit rate (VBR)

2x

FORWARD x2

sequence.

Unable to play all tracks from my CD-RW

- Maximum number of tracks per disc: 400

3x

FORWARD x3

•

Disc dirty / damaged. check CD-RW.

- Maximum number of albums per disc: 99

4x

FORWARD x4

•

Possible recording / MP3 encoding error for particular track(s). Play another

5x

Normal Play

SCAN

disc.

TIP:

• Press – once or several times to select your desired rewinding speed:

Remote control does not work

•

Remove obstacle between the remote control and the player, and point directly

- When the system reads a mixed mode MP3-CD, only the number of

Press

Times of normal speed

instead of at a wide angle at the infrared sensor on the player.

total CDDA tracks is displayed.

1x

BACKWARD x1

•

The battery may be exhausted. Replace the battery with a new one.

2x

BACKWARD x2

•

Try using the remote control with a maximum distance of 3 meters from the

sensor on the player.

3x

BACKWARD x3

•

Try using the remote control within a maximum angle of 300

4x

BACKWARD x4

5x

Normal Play

Picture CD cannot be played

• Make sure that the picture CD is JPEG VGA format (640x480 pixels)

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe

operation.