DIGITAL TUNER
TUNING TO RADIO STATIONS
1.Select TUNER source.
™
is displayed briefly and then the radio station frequency is shown.
2.Press BAND once or more to select your waveband.
3.Press SEARCH ∞ or § and release when the frequency in the display changes.
™The radio automatically tunes to a station of sufficient
reception. Display shows | during automatic tuning. |
™If a FM station is received in stereo, STEREO is shown.
4.Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH ∞ or § briefly and repeatedly until you have found optimal reception.
5.Adjust the power slider to TAPE/OFF position to switch off the set.
MODE
PLAY• |
|
PAUSE | STOP |
| |
SEARCH |
|
TU |
|
NER |
|
| BATT |
PROG | LOW |
|
English
To improve radio reception
–For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong (very close to a transmitter).
–For AM, the set is provided with a
Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1.Tune to your desired station (see Tuning to radio stations).
2.Press PROG to activate programming.
– Display: PROGRAM flashes.
3.Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station.
4.Press PROG again to confirm the setting.
–Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown.
5.Repeat the above four steps to store other stations.
– You can overwrite a preset station by storing another frequency in its place.
Tuning to preset stations
Press PRESET 4 or 3 until the desired preset station is displayed.
STEREOFM
|
|
| SHUFFLE | ALL |
|
|
|
|
|
| D |
|
|
|
|
|
| IGITAL |
|
|
|
|
|
| TUNER |
|
|
|
|
|
|
| PRESET | BAND |
|
|
|
|
|
| |
L | AY•PA |
|
|
| BATT |
|
| USE | STOP |
| PROG |
|
|
| SEARCH |
|
|
|
|
|
SHUFFLE | ALL |
D |
|
|
IGITAL |
|
|
TUNER |
|
|
| PRESET | BAND |
|
| |
| BATT |
|
PROG | LOW |
|
OP |
|
|
11
