| USB Connection |
USB Connection
To erase a program
You can erase a program by:
–pressing 9 (twice during playback or once in the stop position);
–selecting TUNER or OFF position;
–opening the disc door.
➜Display: PROG disappears.
Selecting different play modes (See 7)
You can select and change the various play modes before or during playback, and combine play modes with PROG.
REP – plays the current track continuously.
REP ALL – plays the entire disc/program continuously.
SHUF – plays all tracks in random order.
1To select play modes, press MODE once or more.
2Press 2; to start playback if in the stop position.
3To select normal playback, press MODE repeatedly until the various modes are no longer displayed.
–You can also press 9 to cancel your play modes.
Using USB connectivity
•AZ1835 is fitted with a USB port in the front panel, offering a plug and play feature which allows you to play, from your AZ1835, digital music and spoken contents stored on a USB mass storage device.
•Using a USB mass storage device, you can also enjoy all the features offered by AZ1835 which are explained and instructed in the sections of disc operation.
Compatible USB mass storage devices With the AZ1835, you can use
–USB flash memory (USB 2.0 or USB 1.1)
–USB flash player (USB 2.0 or USB 1.1)
•USB device which requires driver installation under Windows XP is not supported.
Note:
In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. Such protected contents will be unplayable on any other devices (such as AZ1835 device).
Supported formats:
–USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 - 65,536 bytes)
–MP3 bit rate (data rate):
–WMA v9 or earlier
–Directory nesting up to a maximum of 8 levels
–Number of albums: maximum 500
–Number of tracks: maximum 1000
–ID3 tag v2.0 or later
–File name in Uicode UTF8 (maximum length: 128 bytes
The system will not play or support the following:
•Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display.
•
•AAC, WAV, PCM. NTFS audio files
•DRM protected WMA files
•WMA files in Lossless format
Playing a USB mass storage device
1Make sure that your AZ1835 is being powered by AC mains or specified batteries.
2Adjust the source selector to CD/USB.
➜Display shows - - - (see 2), or - - - with USB (see 3)
3Press CD/USB to enter USB mode if USB is NOT displayed.
➜Display will show USB (see 2).
4As shown in figure # , plug a compatible USB mass storage device to AZ1835’s USB
port marked 
. If needed, use a suitable USB cable to connect between the device and AZ1835’s USB port.
➜The device will automatically power on.
•If the device is not powered on, turn on the power manually, then
➜AZ1835’s display shows USB and the total number of playable audio files (Max. displayed track number is 1000) stored on the device.
5Press 2; on your AZ1835 to start play.
➜AZ1835’s display will show USB and share the display information illustrated in the disc operation.
Helpful hints:
–Make sure that file names of MP3 files end with .mp3. and the file names of WMA files end with .wma.
–For DRM protected WMA files, use Windows Media Player 10 (or later) for conversion. Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).
CD Ripping - Recording disc files to a USB device
AZ1835 allows you to copy the music files or spoken contents of a disc to the external USB device.You can record one track, the whole disc or even selected tracks through the Program function.
1Adjust the source selector to CD/USB.
2Insert a disc (audio CD or MP3 or WMA). If desired, program the disc.
3Press CD/USB to enter CD mode if USB is displayed.
4Plug a USB mass storage device.
To record one
5a Select the track you want to record.
5b Press once or repeatedly USB REC (or REC on the remote) until ONE appears, flashing.
➜Disc playback will start automactially from the beginning of the selected track.
➜REC is displayed, and ONE will flash 2 seconds then disappear (see 8).
To record all
5a Press repeatedly USB REC (or REC on the remote) until ALL appears, flashing.
➜Disc playback will start automactially from the beginning.
➜REC and ALL are displayed, and ALL will flash 2 seconds then disappear (see 9).
6To stop recording, first press 9, then unplug the USB device.
•In the
•During MP3 and WMA recording, make sure the playback of the file you want to record is wholly completed before manually stop recording. Or any part of the file will not be recorded.
•During recording, if the memory of the USB device runs out, playback will not continue.
