3 Get started
Caution
•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
•• You can use both batteries and AC power as power supply of this device.
1 Open the battery compartment.
2 Insert 6 x 1.5 V R14/UM2/C CELL batteries (not supplied) with correct polarity
3 Close the battery compartment.
Connect power
Caution
•• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product.
•• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
•• Before you connect the AC power cord, make sure that you have completed all other connections.
Note
•• To save energy: switch the source selector to OFF after use.
•• The device switches to standby mode if keeps inactive for 15 minutes.
6 x 1.5 V R14/UM2/C CELL
EN 7