TROUBLESHOOTING
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set as there is a risk of electric shock.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.
–Problem
• Solution
No sound /power |
| no disc indication | ||
– | Volume not adjusted |
| – | |
• | Adjust the VOLUME |
| • | Insert a CD or a |
– | Mains lead not securely connected |
| – | CD badly scratched or dirty |
• | Connect the AC mains lead properly |
| • | Replace/ clean CD, see Maintenance |
– | Batteries exhausted/ incorrectly inserted |
| – | Laser lens steamed up |
• | Insert (fresh) batteries correctly |
| • | Wait until lens has cleared |
Display does not function does not function |
| – | ||
| • | Use a finalized | ||
properly/ No reaction to operation of any of |
| |||
|
|
| ||
the controls
– Electrostatic discharge
•Switch off and unplug the set. Reconnect after a few seconds
CD playback does not work
– CD badly scratched/ dirty
• Replace/ clean CD (see maintenance)
– Laser lens steamed up
• Wait until lens has adjusted to room temperature
The CD skips tracks
–CD damaged or dirty
• Replace or clean CD
–SHUFFLE or a program is active
• Quit SHUFFLE/ program mode(s)
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials: cardboard, paper pulp and expandable polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, exhausted batteries and old equipment.
