Rent online videos
Rent videos from online stores through this player.
What you need
•A
•An HDMI connection between this player and the TV.
•An SD memory card of type SDHC Class 6, with at least 4GB memory.
Note
•Use a blank SD card. Formatting a SD card will erase any content on the SD card.
•This service is country dependent.
1
2
3
4
5
6
Connect this player to the Internet (see “Set up a network”).
Insert a blank SD card into the SD CARD connector located on the rear panel of this player.
Press 
.
Select [browse Net TV] > Video stores.
Select a video store, and follow the onscreen instructions to rent and watch a video.
»The video is downloaded to the SD card.You can watch it now or at any time within the rental period.
»For the downloaded video on the SD card, you can watch it only on this player.
Use the remote control to play and control the video.
Use Philips EasyLink
This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol.You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices.
1Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details).
2
3
4
Press 
.
Select [Setup] > [EasyLink].
Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch Standby].
»EasyLink function is turned on.
One Touch Play
When you play a disc on this player, the TV automatically switches to the correct video input source.
One Touch Standby
When a connected device (for example TV) is put to standby with its own remote control, this player is put to standby automatically.
18EN
