Philips BDS424IR Remote Management, Swapping the audio of the main or sub-picture, PIP Settings

User Manual BDS4241R

Swapping the main picture and the sub-picture Press the SWAP button.

The main picture and the sub picture are interchanged. It is available in PIP and PBP mode only.

Sub Input
Main Input	SCART 1	SCART 2	VIDEO	S-VIDEO
TV	X	X	X	X
SCART 1	X
SCART 2		X
VIDEO			X
S-VIDEO				X
COMPONENT	X	X	X	X
RGB	X	X	X	X
DVI	X	X	X	X

Swapping the audio of the main or sub-picture

Press the A.SWAP (Audio SWAP) button repeatedly.

You can hear the audio of the main or sub-picture alternately. It is available in PIP and PBP mode only.

Selecting the main picture or the sub-picture

Press the S.SELECT button repeatedly.

You can select the main or sub-picture alternately and adjust the status of selected picture.

It is available in PIP and PBP mode only.

PIP Settings

Sub Input
Main Input	SCART 1	SCART 2	VIDEO	S-VIDEO
TV
SCART 1	X
SCART 2		X
VIDEO			X
S-VIDEO				X
COMPONENT
RGB
DVI

“” Max. : 480p, 576p, 1024x768/60Hz

In the PIP mode, the sub input source is differently defined

for the default value (scart1 or scart2) depending on your PDP model.

6.14REMOTE MANAGEMENT

This display can be managed remotely through the RS232 9-pin port, by using a Serial Interface Communication Protocol (SICP).

The specifications of the SICP protocol can be found in a separate document, called "SICP User Manual".

35

Downloaded From TV-Manual.com Manuals