11
English
3139 115 21261
Preparations
BAntennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
Fix the claw
to the slot
¶Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM Antenna
1
2
¶For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
CSpeakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to "R" and left
speaker to "L", colored (marked) wire to "+"
and black (unmarked) wire to "-".
1 2
¶Clip the stripped portion of the speaker wire as
shown.
Notes:
–For optimal sound performance, use the
supplied speakers.
–Do not connect more than one speaker to any
one pair of +/- speaker terminals.
–Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
DPower Booster Connection
Refer to “Preparations - Rear Connections”.
R
SPEAKERS 6Ω
+–
–
+
BOOSTER IN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ON
POWER SWITCH
OFF
AC MAINS
120V ~ 60 Hz
R
L
R
L
L
1
2 3
4
5
6
VOLUME
1Connect the BOOSTER OUT (Right and
Left) terminals of the mini system to the power
booster amplifier BOOSTER IN (Right and
Left) terminals respectively.
2Connect the speaker wires to the BOOSTER
SPEAKERS terminals, right speaker to "R" and left
speaker to "L", colored (marked) wire to "+"
and black (unmarked) wire to "-".
3Plug in the AC mains to the wall socket.
4Switch on the POWER SWITCH to activate
the power booster amplifier.
5Press STANDBY ON button to switch the
system ON or to Standby mode.
6Rotate the VOLUME control to adjust the
loudness of the power booster amplifier.
pg 001-032/C798/37-Eng 4/16/02, 6:38 PM11