Philips CCB130AT owner manual Hooking Up the TV/VCR cont’d, Crooked Pin Straight Pin

Models: CCB130AT

1 60
Download 60 pages 38.06 Kb
Page 7
Image 7

Hooking Up the TV/VCR (cont’d) 7

D.

Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)

You may need this connection if you want to copy tapes. Details are on page 31.

AUDIO/VIDEO OUT

Jacks on VCR

Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO Jack on the front of the TV/VCR.

CCB130

3CH IN 4CH

AUDIO VIDEO

OUT ANT.

INOUT

AUDIO VIDEO

3CH

IN

4CH

 

AUDIO VIDEO

ANT.

OUT

INOUT

AUDIO/VIDEO Jacks on front of TV/VCR

Use a Video cable to connect the VIDEO OUT Jack on the VCR to the VIDEO Jack on the front of the TV/VCR.

2

Plug in the TV/VCR’s power cord.

3

Before you turn on the TV/VCR, go to page eight.

Helpful Hints

Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.

A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303 37006. To order, call 1-800-851-8885. (This antenna will fit the CCB130 and CCB132 only.)

Audio and video cables are not supplied.

 

Bent pin

Crooked Pin

Straight Pin

Cable

Plug

Page 7
Image 7
Philips CCB130AT owner manual Hooking Up the TV/VCR cont’d, Crooked Pin Straight Pin