Philips CCB190AT On-Screen Status Displays, Helpful Hint, Current, Tape, Time, Counter, Speed

26 On-Screen Status Displays

A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below.

If you select STATUS ON, then select COUNTER ONLY OFF:

●Whenever you press the STOP/p button or the PLAY/o but-

ton, the status display will appear for five seconds. Portions of the status display also may appear when you press other func- tion buttons.

If you select STATUS ON, then select COUNTER ONLY ON:

●Whenever you press the PLAY/o button, the status display will appear for five seconds. After five seconds, only the counter will remain on the screen. Portions of the status display also may

appear when you press other function buttons.

If you select STATUS OFF:

●The status display will not appear when you press function but- tons. You must press the STATUS/EXIT button to see the sta- tus display.

1

Press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button.

3

Press the PLAY/▲ button or the STOP/▼ button to select ON-SCREEN MODE, then press the F.FWD/B button.

4

Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that ON or

OFF appears beside STATUS.

ON-SCREEN MODE

> STATUS	[ON]
COUNTER ONLY	[OFF]

SELECT KL CHOOSE B

TO END PRESS EXIT

5

If you set STATUS to OFF, go to step 6. If you set STA- TUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that ON or OFF appears beside it.

6

Press the STATUS/EXIT button.

				Current
Channel				Tape
	Time			Function
		12:00 AM		STOP
		CH10
		SLP	M 1:23:45
	Tape		Counter
	Speed		and
			Counter
			Memory

Helpful Hint

•You cannot view closed captions during recording or tape playback if COUNTER ONLY is set to ON. Details are on pages 49-50.