![](/images/new-backgrounds/1141661/14166159x1.webp)
Press MENU.
Select [ADVANCED SET] > [NETWORK TYPE], then press [OK]. Select a network type, then press [OK]. »» The setting is saved.
1
2
3
•• For more information about the default settings, see the section on Default settings.
Network type
Note
•• This feature only applies to models with network type support.
Tip
»» The welcome screen displays.
Press [OK] to confirm. »» All settings are reset.
3
»» The handset displays a confirmation request.
Select [ADVANCED SET] > [RESET], then press [OK] to confirm.
Press MENU.
a handset number to the handset.
»» Registration is completed in less than 2 minutes.The base automatically assigns
Press [OK] to confirm the PIN.
Enter the system PIN. Press [BACK] to make corrections.
Press and hold on the base station for 5 seconds until you hear a confirmation beep.
Press MENU on the handset.
Select [ADVANCED SET] > [REGISTER], then press [OK] to confirm.
You can reset your phone settings to the original factory settings.
1
2
»» The handset is unregistered. Tip
•• The handset number displays beside the handset name in standby mode.
Restore default settings
Select the handset number to be unregistered.
Press [OK] to confirm.
4
5
Press MENU.
Select [ADVANCED SET] > [UNREGISTER], then press [OK] to confirm.
2
3
If two handsets share the same base station, you can unregister a handset with another handset.
1
Unregister the handsets
13 Advanced settings
Register the handsets
You can register additional handsets to the base station.The base station can register up to 5 handsets.
Auto registration
1 Place the handset on the base station. »» The handset detects the base station
and start to register automatically. »» Registration is completed in less than 2
minutes.The base station automatically assigns a handset number to the handset.
Manual registration
If auto registration fails, register your handset manually to the base station.
1
2
3
4
5
Note
•• If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.
Note
•• The preset PIN is 0000. No change can be made on it.
30EN