Philips 775 Selecting Another Track During Play S T, Direct Play, CD DIRECT PLAY, S T and PLAY

Models: 775 CDC775BK

1 13
Download 13 pages 40.04 Kb
Page 7
Image 7
Selecting Another Track During Play (S T)

pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 15

Selecting Another Track During Play (S T)

Press T or S (less than 0.5 seconds) until the

desired track number appears under TRACK.

TRACK

TRACK TIME

Selecting Another CD During Play (CD 5

The music stops and a moment later the selected track begins to play.

WRONG tRACK lights up when you select a non- existent track number.

Selecting Another CD During Play (CD

DIRECT PLAY)

• Key in the desired CD number.

The music stops and a moment later the selected CD begins to play.

NO dISC lights up when there is no CD in the selected CD compartment. You can also select the num- ber by using the DISC button on the remote control.

Searching For A Passage During Play (S T)

Hold S down to search backwards to the beginning.

Hold T down to search forwards to the end. The searching speed is determined by how long a key is pressed:

the first 2 seconds fairly slowly, with sound;

then at the maximum speed, with no sound.

If you reach the end of the last track and release T, play will resume a few seconds before the end of the CD.

Starting With A Particular CD (CD DIRECT PLAY)

• Key in the required CD number.

If the CD compartment was open, it will now close.

Play starts from the selected CD.

NO dISC lights up when there is no CD in the selected CD compartment. You can also select the num- ber by using the DISC button on the remote control.

Starting With A Particular Track

(CD DIRECT PLAY, S T and

PLAY 2)

First select the number of the required CD using CD DIRECT PLAY or DISC on the remote control.

If the CD compartment was open, it will now close.

• Then select the (track) number by using T or S (press less than 0.5 seconds).

• Press PLAY 2.

Play starts from the selected track.

WRONG tRACK lights up when you select a non- existent track number.

NO dISC lights up when there is no CD in the selected CD compartment.

PLAYBACK

Scanning CDs (SCAN)

All CDs:

• Press SCAN before or during play.

If the CD compartment was open, it will now close.

SCAN lights up and the first 10 seconds of each track are played in turn (starting from the current track). 10 seconds are counted down each time under REM(aining) TRACK TIME.

TRACK

REM TRACK TIME

DIRECT PLAY) 5

When the player reaches a track which you wish to hear in full, press SCAN again or PLAY 2.

English

15

Page 7
Image 7
Philips 775 manual Selecting Another Track During Play S T, Direct Play, Searching For A Passage During Play S T, Playback