Philips CDC 775 manual Installation, Connections, Connecting Headphones, Digital Out, Analog Out

pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 10

INSTALLATION

English

COAXIAL

DIGITAL OUTPUT

RL

ANALOG

OUT

1 2

Connections

1Digital Out

This output supplies digital signal and can therefore only be connected to an input which is suitable for this signal. Use here a lead with one cinch plug on either end.

Never connect this socket to a non-digital input of an amplifier, such as AUX, CD, TAPE, PHONO etc!

2Analog Out

For the connecting cable to the amplifier.

•Insert a red plug into the ‘R’ socket and the other plug into the ‘L’ socket.

•Insert the two other plugs into the corresponding sockets of the CD or AUX input of your amplifier. You can also use the TUNER or TAPE IN connection, but never the PHONO input!

Connecting Headphones

•Connect headphones with a 6.3 mm jack plug to the PHONES socket.

•The sound level is adjusted with the LEVEL control.

PHONES

LEVEL

MINMAX

Note:

–The volume control on the remote control must not be at the minimum level.

10