xp QRC CDR 800/17 eng.1
Philips Audio CD Recorder CDR 800: Getting started…
RECORD PLAYER
PHONO
R |
OUT
English
AC MAINS 
DIGITAL
OPTICAL IN
IN
AMPLIFIER/
RECEIVER
CD RECORDER
ANALOG
L |
R |
OUT | IN OUT |
CDR/TAPE
L |
R |
IN OUT
PHONO
IN
ANALOG
L |
IN
DIGITAL | DIGITAL COAXIAL SOURCE | ANALOG |
| ||
| (CD player, DVD, DAT) | R |
|
| |
OUT |
| OUT |
|
|
General information
This Quick Installation Card gives a rough overview and helps to quickly start with basic steps. Please read the supplied instruction manual for detailed information.
Power
1Check whether the power voltage as shown on the type plate corresponds to your local power voltage. If it does not consult your dealer or service organization.
2After all connections have been made connect the power cord to AC MAINS ~ and to the wall outlet.This switches on the AC power supply.
To disconnect the set from the power completely, remove the power plug from the wall outlet.
Discs for recording
Use discs with the “Digital Audio” logo only:
–
–
Do not use computer CDR(W)s as |
|
recording would not work properly. | ReWritable |
Discs for playback
playback | standard | CDRW | Philips |
in: | CD player | compatible | CDR 800 |
disc: |
| CD player |
|
finalized CDR | ● | ● | ● |
finalized CDRW |
| ● | ● |
unfinalized CDR |
|
| ● |
or CDRW |
|
| CD Recorder only |
MP3 CD |
|
| ● |
Note: MP3 playback works only if the filenames end with “.mp3”.
Demo mode
The demo mode displays various features of the set and will start automatically.
0To switch off the demo mode keep STOP 9 pressed for at least 5 seconds. ➜ The demo mode is cancelled permanently.
