6 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1Ensure that you have set the clock correctly. (See “Get started - Set time and date”.)
2 Press and hold ALM 1 or ALM 2 for 2 seconds.
»[AL 1] or [AL 2] begin to blink.
3Press SOURCE on the top panel to select an alarm sound source: iPod/iPhone, FM tuner, or buzzer.
4Press ALM 1 or ALM 2.
» The hour digits begin to blink.
5Press 
/
repeatedly to set the hour.
6Press ALM 1 or ALM 2WRFRQÀUP
» The minute digits begin to blink.
7Repeat steps
8Repeat steps
9Repeat steps
Tip
If you set iPhone/iPod playlist as the sound source, you must create a playlist in iTunes called “PHILIPS” and import it to your iPhone/ iPod.
If no playlist is created in the iPod/iPhone or there is no song in the playlist, the unit will wake to songs in the iPod/iPhone.
Activate and deactivate the alarm timer
1Press ALM 1 or ALM 2 repeatedly to activate or deactivate the timer.
»If the timer is activated, [ 
AL 1] or [ 
AL2] is displayed.
»If the timer is deactivated, [ 
AL1] or [ 
AL2] disappears.
Repeat alarm
1When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes later.
Tip
You can press 
/
to adjust the interval to repeat alarm.
Stop alarm ring
1When the alarm rings, press the corresponding ALM 1 or ALM 2.
»The alarm stops but the alarm settings remain.
View the alarm settings
1Press ALM 1 or ALM 2.
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1Press SLEEP repeatedly to select a set period of time (in minutes).
»When the sleep timer is activated, the display shows 
, and the volume will gradually decrease in the last 5 minutes.
To deactivate sleep timer
1Press SLEEP repeatedly until [OFF] (off) is displayed.
»When the sleep timer is deactivated, 
disappears on the display.
Adjust display brightness
1Press BRIGHTNESS/REP ALM repeatedly to select different levels of display brightness.
14EN
