Philips DC310 quick start Setting and switching off Sleep, Reset, Connecting AN External Device

Setting and switching off SLEEP

1Set your timer by pressing SLEEP repeatedly until the desired timer option

appears.

™Selections are follows (time in minute):

120=90=60=30=15=OFF=120

2The set will turn off automatically at the selected time.

3To cancel sleep, press either:

–POWER

–SLEEP once or more until SLEEP disappears from the display.

Reset

Should your set receive external interference e.g. static electricity from carpets, thun- derstorms, etc. RESET allows you to clear all previous settings and start up again.

• Use a ballpoint pen to press the RESET hole found on the bottom of the set.

CONNECTING AN EXTERNAL DEVICE

You can listen to the sound of the connected external device through your DC310’s speakers.

1Press TUNER/AUX twice to select AUX mode.

2Use the supplied AUX-IN cable to connect DC310’s AUX IN jack to an AUDIO OUT or headphone jack on an external equipment (such as CD player, or VCR).

MAINTENANCE & SAFETY

•Install the unit near the AC outlet and where the AC power plug can be easily reached.

•The apparatus shall not be exposed to dripping or splashing.

•Do not expose the set to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.

•To clean your set, use a soft damp cloth or chamois leather. Do not use clean- ing products, which contain benzene, thinner, etc. as these may harm the housing.