1
Connect the AC power adaptor of the system.
Tip
–See the User Manual for how to connect other equipment to this system.
–Use the supplied AC power adaptor only! Using any other power connection device may damage your main set!
1
Setting the clock
1
In standby mode, press and hold PROG/SET TIME on the remote control.
2
Press VOLUME +/- (or VOL +/- on the remote control) to switch between 12 hour and 24 hour display.
3
Press PROG/SET TIME on the remote control again to confirm.
➜The clock digits flash on the display panel.
4
Press VOLUME +/- (or VOL +/- on the remote control) to set the hours.
5
Press PROG/SET TIME on the remote control again. ➜ The clock digits for the minutes flash.
6
Press VOLUME +/- (or VOL +/- on the remote control) to set the minutes.
7
Press PROG/SET TIME on the remote control to confirm the time.
