11
English
BASIC FUNCTIONS
Switching on for OSD language setup
English is the default language of your player’s on screen display. You may
choose to use English, French or Spanish for your player’s on screen display.
Region OSD Language Options
APAC English, French, Spanish
1Press ONbriefly to switch on the player.
2Press SETUPfor the setup menu.
3Select Languageand press 4.
4Select OSD and press 2to select from OSD lan-
guage options.
5Select your preferred language and press OK.
Loading discs and switching on
1Push OPENto open the disc door.
2Insert your chosen disc, label side up (also when a double sided
DVD disc is inserted). Make sure it is sitting properly in the correct recess.
3Gently push to close the door.
4Slide the POWERswitch to ON to switch on the player.
TIP
A normal mechanical noise is heard during playback.
✔
GENERAL EXPLANATION
About this manual
This manual gives the basic instructions for operating this DVD player.
Some DVD discs however are produced in a way that requires specific
operation or allows only limited operation during playback. In these cases
the player may not respond to all operating commands. When this occurs,
please refer to the instructions in the disc inlay. When a “ ” appears on
the screen, the operation is not permitted by the player or the disc.
Remote control operation
• Unless otherwise stated, all operations can be carried out with the
remote control. Always point the remote control directly at the player,
making sure there are no obstructions in the path of the infrared beam.
• When there are corresponding keys on the main unit, they can also be used.
Menu navigation
• Your player has an intuitive menu navigation system to guide you through
various settings and operations.
• Use the function keys to activate / disable relevant operations.
• Use3,4,1,2to browse through menus.
• Press the OKkey to confirm your selection.
P001-020_DCP851_79_Eng 2008.5.7 10:40 Page 11