Philips DSX5500 manual Video Decoding, Audio Decoding, Reception Demodulation, Satellite Input

Digital Multi-Satellite Receiver

DSX5500

Features At A Glance

✓DIRECTV program reception

✓Local program reception

✓Multiple satellite support

✓Advanced Program Guide (APG)

✓Satellite Audio/Video Interface

✓APG Reminders for up to 25 different programs

✓Enhanced PPV menus

✓Custom favorite lists for up to 4 different users

✓SmartSurf™ for channel surfing by program themes or categories

✓Browse other program info while watching another program

✓Parental control

✓One-touch channel back

✓Automatic software enhancements and upgrades

✓IR Universal Remote

✓Powerful 32-bit processor

✓DIRECTV messaging

✓Macrovision copy protection

✓English & Spanish on-screen menus

Technical Specifications

Video Decoding

•MPEG-2 compliant (up to Main Profile/Main Level)

•Video bit rate: up to 15 Mbit/sec

•Video format: 4:3 and 16:9

•Resolution: up to 720 x 480 pixels

Audio Decoding

•MPEG-1 layer II

•Sampling frequency: 48KHz

•MPEG-1 system packets

Reception Demodulation

•QPSK Type

•Input frequency range: 950 to 1450MHz

•Input level range: -69 to -23dBm

Specifications are subject to change without notice.

©2002 Philips Consumer Electronics

A Division of Philips Electronics North America Corp.

DSX5500

Satellite Input

•RF input: F-type connector, 75 ohm

•LNB supply: 0V/13V/18V

•LNB current: max. 450mA on 13V max 450mA on 18V

•Tone switching (on/off): 22kHz

•DiSeqC V1.0 and 1.1 compatible

Antenna Interfaces

•RF input and output: F-type connector, 75 ohm

•ITU R624-4 standard

•M/NTSC, output to channel 3 or 4

S-Video Output

•Luminance: 1V peak to peak on 75

Ohm load, DC level : 2V max on video blanking level

•Chrominance: 286mV peak to peak on 75 Ohms load for color sub carrier reference

Composite Video Interfaces

•CVBS 2 video inputs and outputs

•ITU R624-4 standard

•1V peak to peak on 75 Ohm load

•DC level : 2V max on video blanking level

Audio Interfaces

•2 Audio L/R inputs and outputs

•2V max peak to peak on 100Kohm load

•250mV nominal level

Integrated telephone modem (Return Path)

•Built-in RJ-11 connector

•Modem type: v.22bis, Bell 212A

•Dialing mode: DTMF & pulse

•600 Ohm impedance

•100mA max

Electrical

•Main power supply: 110V (10%, 60Hz)

•Power consumption: max. 35W (Max. 450mA of LNB current)

Environmental

•Temperature

-Operating: 5 to 45ºC

-Storage: -10 to 70ºC

Physical Dimensions

•Size:

15.2in.(W) x 2.4in.(H) x 11.6in.(L) (380mm x 60mm x 275mm)

•Weight: 4.9lbs. (2.2kg)

•Carton size:

18.8in (W) x 4.8in (H) x 15.4in(L) (470mm x 120mm x 385mm)

•Total carton weight: 8 lbs. (3.6 kg)

Package Contents

•Digital Satellite Receiver

•IR universal remote control (Two AA batteries included.)

•Conditional Access (CA) card

•RJ-11 to RJ-11 cable

•Main power supply cord

•User Manual

•RF cable

Optional Accessories

•DIRECTV 18" dual-LNB satellite dish

•DIRECTV multi-beam dish with 2x dual-LNB

•Audio/video cables

UPC: 0 37849 92452 5

For more information about Philips satellite products and accessories, please contact:

Philips Digital Networks

64 Perimeter Center East

Atlanta, GA 30346

Telephone: (770) 821-2400

Facsimile: (770) 821-2852

http://www.philipsusa.com

DIRECTV programming is sold separately and independently of DIRECTV System hardware. A valid programming subscrip- tion is required to operate DIRECTV System hardware. Please contact DIRECTV directly at 1-800-DIRECTV to order programming.With this receiver and the proper satellite dish antenna, you may be able to subscribe to local channels from DIRECTV in certain areas. Additional equipment may be required in some markets.

DIRECTV and the Cyclone Design logo are trademarks of DIRECTV, Inc., a unit of Hughes Electronics Corp., and are used with permission.