10
English
Connecting to OptionalEquipment
●A digital component with a built-in MPEG 2 or
Dolby Digital™ decoder allows you to enjoy the
surround sound while producing the effect of
being in a movie theater or a concert hall.
●The player outputs the surround sound signals
from the DIGITAL OUT COAXIAL connectors.
If your receiver has a MPEG 2 or Dolby
Digital™ decoder,
1Connect the COAXIAL DIGITAL AUDIO OUT
of the DVD player to the COAXIAL DIGITAL
AUDIO IN on your receiver.
2You will need to set the DVD player’s digital
output to ALL (see ‘Personal Preferences’).
COAXIAL
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital
TV OUT
L
R
(CVBS)
VIDEO OUT
AUDIO OUT
TO VIDEO IN
TO SCART IN
OR
REAR
SPEAKERS REAR
SPEAKERS
TO COAXIAL IN
RECEIVER with
MPEG 2 or Dolby
Digital™ decoder
Notes:
– If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
– To see the selected audio format of the
current DVD in the Status Window, press SYSTEM
MENU.
– MP3 Audio is not available on the Digital
Output.
Inserting batteries into theRemote Control
1Open the battery cover.
2Insert batteries (AA size) with the correct
polarity as indicated by the + and - symbols
inside the battery compartment.
3Close the cover.
+
-
+
-
CAUTION!
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed off properly
and kept away from children.

Using the Remote Control

●Direct the remote control at the remote sensor
of the DVD player.
●Do not drop the remote control.
●Do not leave the remote control near extremely
hot or humid place.
●Do not spill water or put anything wet on the
remote control.
Preparation