Changing the 4-digit code
1When disc playback is stopped, select ACCESS CONTROL in the features menu using the w/v keys.
2Enter the old code.
3Move to CHANGE CODE using the w key.
4Press the u key.
5Enter the new
6Enter the code a second time and reconfirm by pressing OK.
7Press t to exit the menu.
Note: If you forget your 4 digit code, it can be cancelled by pressing 9 four times in the ‘Access Control’ dialog.You can then enter a new code (twice!) as described above.
Parental Control Disclaimer
"This DVD player features the PARENTAL CONTROL system which is intended to activate when playing DVD discs furnished with certain software coding made.This is according to technical standards adopted by the set maker and disc content industries.
Please note that the PARENTAL CONTROL system will not activate to the extent a DVD disc is not furnished with the appropriate software coding. Also note that at the time of release of this DVD player, certain aspects of the said technical standards had not been fully settled among set maker and the disc content industries.
On this basis Philips cannot warrant functioning of the PARENTAL CONTROL system and disclaims any liability of unintended watching of disc contend.
If in doubt, please check system functioning with the disc before you allow children access or apply to the relevant disc publisher."
