1 | Connect |
Start with the ‘Basic Connection.’ |
If you have a Cable Box or Satellite Receiver, follow the instructions for ‘Connection with a Cable Box or Satellite Receiver’.
2Set up
Basic Connection
Television (rear)
To antenna or
Connection with a Cable Box or Satellite Receiver
Television (rear)
To antenna or
AFinding the viewing channel
APress
BTurn on the TV and other connected devices (e.g. Cable Box, Satellite Receiver).
You should see the welcome menu.
Welcome
BPress OK on the remote control.
The auto scan menu appears and the automatic TV channel search starts.
Auto Scan
Auto scan the channels.
100%
Cancel
OK Next Page | BACK Prev Page |
Before using the recorder,
please complete the initial installation.
OK Next Page
Note This process may take several minutes.
Cable box/ Satellite
C Press OK on the remote control to continue.
receiver (rear)
C In case you don’t see the recorder’s welcome
The clock setting menu appears.
1
To AC 
power
COAXIAL | P | AUDIO |
OUT 3 |
DVD Recorder (rear)
UT | VIDEO | PR | COMPONENT | Y |
|
|
| VIDEO |
|
UT 1 |
| C |
|
|
|
|
|
|
UT 2
COAXIAL | PB | AUDIO | |
| (DIGITAL AUDIO) | OUT 3 |
ADisconnect the antenna cable from your TV and connect it to the 
socket on this recorder.
BUse an RF antenna cable to connect the 
socket on this recorder to the Antenna In socket on the TV.
CUse the supplied video cable (yellow plug) to connect the VIDEO (CVBS) OUTPUT jack on this recorder to the VIDEO IN jack on the TV.
DUse the supplied audio/video cable (red/ white plugs) to connect the AUDIO OUTPUT jacks on this recorder to the AUDIO IN jacks on the TV.
EConnect the power cable from the recorder to an AC power outlet.
1 |
| IN | RF |
| R |
| L | OUT | |||
|
|
|
|
| VIDEO | AUDIO | |||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6
To AC power
DVD Recorder (rear)
| VIDEO (CVBS) |
| INPUT |
|
| EXT 1 |
|
|
|
| L |
| L |
|
| IN |
|
| EXT 3 |
|
|
|
| |
| R |
| R |
|
| EXT 2 | AUDIO | PR | PB |
|
| AUDIO | COMPONENT VIDEO |
AKeep the existing antenna connection from the Antenna TV signal to the Cable Box/ Satellite Receiver.
BUse an antenna cable to connect the
jack on the recorder to the RF OUT jack on the Cable Box/Satellite Receiver.
CFollow steps C to E under ‘Basic Connections’ before you proceed to step D below.
Note The antenna connection may be different depending on the Satellite Receiver/Cable Box. Refer to its user manual for proper antenna connection.
DUse the yellow video cable (not supplied) to connect the VIDEO (CVBS) INPUT jack on this recorder to the VIDEO OUT jack on the Cable Box/ Satellite Receiver.
EUse the audio cable (red/white plugs – not supplied) to connect the AUDIO INPUT jack on this recorder to the AUDIO OUT jack on the Cable Box/ Satellite Receiver.
For additional connection diagrams, see the
accompanying User Manual.
menu, press the Channel Down button on the
Clock Setting
TV’s remote control repeatedly (or AV, |
|
|
| Set the system time. |
|
| ||
SELECT, ° button) until you see the menu. |
|
|
|
|
| |||
|
| Date: |
| Time: |
|
| ||
This is the correct viewing channel for | 01 | / 01 | / | 2007 | 12 | : 00 | : | 00 : AM |
the recorder. |
|
|
|
|
|
|
|
|
|
| OK |
| Next Page |
| BACK Prev Page | ||
B Start basic setup
Use the recorder’s remote control and follow the
APress OK on the remote control.
Use ST keys to select the tuner mode.
D Use ST keys to set the current date and time, use W X keys to select different entry fields.
Note You may use the numeric keypad
EOnce complete, press OK to confirm. The final installation screen appears.
Tuner Mode
Select current tuner mode.
Antenna
Cable
OK Next Page | BACK Prev Page |
{Antenna }
if the recorder is connected directly to an indoor or outdoor antenna.
{Cable }
if the recorder is connected directly to the cable signal or through
Finish
The installation is completed.
The recorder is now ready for use.
OK Exit | BACK Prev Page |
FPress OK to exit.
The DVD recorder is now ready for use.
