Philips DVP3040K user manual Sound and Volume Controls, Subwoofer

Rear Speakers Subwoofer Speakers Volume Speakers Delay

4 Enter its submenu by pressing 2.

5 Press 34 to highlight one of the options below at a time, then press 2.

{FRONT SPEAKERS, CENTER SPEAKER, REAR SPEAKERS}

OFF – when no speaker is connected. LARGE – when connected speakers can produce low frequency signals below 120Hz.

SMALL – when connected speakers cannot produce low frequency signals below 120Hz.

Setting the speakers’ channels

You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.

IMPORTANT!

The speaker settings only available on Multi-channel audio outputs.

1 Press STOP then, press SETUP.

2 Press 2 repeatedly to select {AUDIO SETUP PAGE}.

3 Press 34 to highlight {SPEAKER SETUP}, then press 2.

- - Audio Setup Page - -

Analog Output Digital Audio Setup Sound Mode Speaker Setup CD Upsampling

Night Mode

- - Speaker Setup Page - -

Center Speaker

Small

Front Speakers

Large

Sound and Volume Controls

{SUBWOOFER}

ON – when a subwoofer is connected. OFF – when no subwoofer is connected.

{SPEAKER VOLUME} – Volume level setting for individual speakers (-6dB ~ +6dB).

- - Speakers Volume Setup - -
Front Left	0dB0
	0dB0
Front Right
	0dB0
Center
	0dB0
Subwoofer
	0dB0
Rear Right
	0dB0
Rear Left

{SPEAKER DELAY} – Delay times setting in relation to the listening position/ distance for centre and surround speakers (1m ~ 10m).

- - Speakers Distance Setup - -
Center	1.0M
	1.0M
Subwoofer
	1.0M
Rear Right
	1.0M
Rear Left

6 Press 1 2 to adjust the setting that best suit your surround sound needs.

7 Press OK to confirm.

Helpful Hints:

– Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

– The test tone will be automatically generated to help you judge the sound level of each speaker.

E n g l i s h

TIPS: The underlined option is the factory default setting.

Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.

37

01-41_DVP3040K_93_engRC3 37 02/06/06, 11:27 AM