REMOTE CONTROL AY3785, Batteries, Helpful Hints

REMOTE CONTROL AY3785

Connecting the remote control (not for all versions)

Use the AY 3785 cord remote control. The buttons on the remote control have the same functions as the corresponding buttons on the set.

1	Check your set is switched off.
2	Firmly connect the remote control to LINE OUT p on the set.
3	Firmly connect the headphones to the plug on the remote control.
4	On the remote control, press 2; to switch on the set and start playback.

You can use 2 battery sizes with this set:

• alkaline batteries type AAA (LR03, UM4) or AA (LR6, UM3).

–Use AA batteries to enjoy longer playback time.

–Old and new or different types of batteries should not be combined.

–Remove batteries if they are empty or if the player is not going to be used for a long time.

5 Adjust the volume on the player and your remote control.

Helpful Hints:

– Check that the HOLD switch on the remote is adjusted to the OFF position if

Inserting AAA (LR03, UM4) or AY 3363 batteries

1Open the battery compartment.

2Insert AAA batteries as shown onto the back of the AAA battery door.

3Fit the AAA battery-loaded door onto the battery compartment.

LR03/AAA

/UM4

you wish to operate the player using the remote control.

6 5

1Open the battery compartment.

2Insert AA batteries as shown into the battery com- partment.

3Close the battery compartment with the AA marked door.

AASIZE LR6 / UM3

2 3 4

The battery level is shown in the display screen as follows:

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are dead, flashes, Pls replace batteries is displayed and you

will hear beep sounds.