Basic Operations
E n g l i s h
Switching on/off
Switching to active mode
●Press CD, TUNER, USB PC LINK or AUX•GAME.
Switching to Eco Power standby mode
●Press B.
➜ECO POWER button lights up.
➜The display screen will go blank.
Switching to standby mode (view clock)
●Press and hold B.
➜The clock is displayed.
➜While in standby mode, pressing CLOCK•TIMER button will switch the system to Eco Power standby mode.
Note:
–Before switching the system to Eco Power standby or standby mode, make sure the demonstration mode has been deactivated.
Demonstration mode
If the demonstration mode is active, whenever you switch the system to Eco Power standby or standby mode, it will begin showing the various features offered by the system.
Setting the clock
The clock can be set in either
5 | (00:00 / 12:00AM) |
4 | (00:00 / 12:00AM) |
2 |
|
CLK/TIMER | (00:00 î12:00AM) |
3 |
1, 2 , 6
1 Press and hold CLK/TIMER (or CLOCK •TIMER on main unit) until "SELECT CLOCK OR TIMER" is displayed.
2Press ë to change the display to "CLOCK" and press CLK/TIMER (CLOCK•TIMER) again to confirm.
3Press PROGRAM (PROG) repeatedly to change between
4Press à or á repeatedly to set the hour.
5Press í or ë repeatedly to set the minute.
6Press CLK/TIMER (CLOCK •TIMER) to store the setting.
➜ The clock will start working.
To activate the demonstration
●In Eco Power standby/standby mode, press and hold Ç on the main unit until "DEMO ON" is displayed.
To deactivate the demonstration
●Press and hold Ç on the main unit until "DEMO OFF" is displayed.
To view the clock time in any active mode
●Press CLK/TIMER (CLOCK •TIMER) once.
➜ The clock is displayed for a few seconds.
Notes:
–The clock setting will be erased when the system is disconnected from the power supply.
–The system will exit clock setting mode if no button is pressed within 90 seconds.
16
