Philips FWD397/98 owner manual Plug & Play, Playing a disc, Region Codes, A V I N

3

A V I N

Make sure your DVD system and TV are connected and turned on!

Plug & Play

1Turn on the system.

“AUTO INSTALL PRESS PLAY” will be displayed.

2Press 2; on the system to start installation.

Playing a disc

3Press DISC1/2/3 on the remote control. You can also select the DISC on the front panel.

4Turn on the TV and select the correct Video mode.

You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).

5Press OPEN/CLOSE on the front of the DVD system and load discs, then press the corresponding OPEN/CLOSE again to close the disc tray.

Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.

6Playback will start automatically.

If a disc menu appears, use 1/¡/5/4 buttons on the remote control to make the necessary selection, then press OK to confirm. Or use the numeric keypad on the remote control to select features. Follow the instructions given in the disc menu.

7To stop playback, press 9.

Region Codes

DVDs must be labeled for ALL regions or Region 3 , in order to play on this DVD system.

3

You should find the below accessories in the packaging box.

Detailed playback features and additional functions are described in the

accompanying owner’s manual