Philips FWM208 Get started, Connect speakers, Install remote control batteries, Connect power

3 Get started

Caution

•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________

Serial No. ___________________________

Connect speakers

1 Plug the two gray-blue cables into the “HIGH CH” sockets as indicated by the “+/-” symbols, right speaker to “R” and left speaker to “L”.

2 Plug the two red-black cables into the “LOW CH” sockets as indicated by the “+/-” symbols, right speaker to “R” and left speaker to “L”.

HIGH

R+_ +_L

E n glish

Install remote control batteries

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

1 Open the battery compartment.

2 Insert 2 AAA batteries with correct polarity (+/-) as indicated.

3 Close the battery compartment.

3

1 2

Connect power

Caution

•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage set on the voltage selector on the back of the unit.

•Before connecting the AC power cord, ensure you have completed all other connections.

Note

•The type plate is located on the back of the main unit.

EN 7