2Place the kettle on its base and put the plug in the wall socket.
3Push the on/off switch downwards to switch on the appliance (Fig. 5). ,, The power-on light goes on.
,, The kettle starts heating up.
,, The kettle switches off automatically (‘click’) when the water boils.
,, The power-on light goes out automatically when the kettle switches off.
Note:You can interrupt the boiling process at any time by pushing the on/off switch upwards.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.
Never immerse the kettle or its base in water.
1Unplug the appliance.
2Clean the outside of the kettle with a soft cloth moistened with warm water and some mild cleaning agent.
3Clean the scale filter regularly.
Scale is not harmful to your health but it may give your drink a powdery taste.The
scale filter prevents scale particles from ending up in your drink. Clean the scale filter
in one of the following ways:
-- Take the scale filter out of the kettle and gently clean it with a soft nylon brush under a running tap. (Fig. 6)
-- Leave the scale filter in the kettle when you descale the whole appliance. -- Clean the scale filter in the dishwasher.
Descaling
Regular descaling prolongs the life of the kettle.
In case of normal use (up to 5 times a day), we recommend the following descaling frequency:
-- Once every 3 months for soft water areas (up to 18dH).
-- Once every month for hard water areas (more than 18dH).
1Fill the kettle with approx. 900ml water.
2Switch on the kettle.
3After the kettle switches off, add white vinegar (8% acetic acid) to the MAX indication.
4Leave the solution in the kettle overnight.
5Empty the kettle and rinse the inside thoroughly.
6Fill the kettle with fresh water and boil the water.
7Empty the kettle and rinse it with fresh water again.
Repeat the procedure if there is still some scale in the kettle.
Tip:You can also use an appropriate descaler. In that case, follow the instructions on the package of the descaler.
Storage
1To store the mains cord, wind it round the reel in the base (Fig. 2).
Replacement
If the kettle, the base or the mains cord of the appliance is damaged, take the base or the kettle to a service centre authorised by Philips for repair or replacement of the cord to avoid a hazard.
You can purchase a new filter (order number 4222 459 45328) at your Philips dealer or at a Philips service centre.
Environment
-- Do not throw away the appliance with the normal household waste at the end
of its life, but hand it in at an official collection point for recycling. By doing this,
you help to preserve the environment (Fig. 7).
Guarantee and service
If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer.
HD4671
Save energy, only boil what you need
Filling your kettle completely to make just one or two cups of tea wastes energy.This Philips kettle has a unique 1 cup indicator so you can easily see exactly how much water you need. By only boiling the cup of water you need you could save up to 66% energy, that’s enough to earn your kettle back in a year!*
If everyone boiled only the amount of water they need, we could light the streets of the UK for 7 months! (DEFRA).
* boiling 1 cup vs. 1 litre, 8 times a day
Did you know this about your kettle?
✔✔ Boiling some water in the electric kettle to wash a few dishes is more energy-efficient than filling the sink with hot tap water.
✔✔ Boiling water in the electric kettle is more efficient than boiling water on the stove.
✔✔ Boiling cold water in the kettle takes less energy than boiling hot water, despite the longer boiling time.You save the energy that would otherwise be used to heat up water in your hot water system.
Energy saving tips and tricks
✔✔ Switch to energy-efficient light bulbs
Energy-efficient light bulbs last up to 10 times longer than standard ones and use up to 80% less energy at the same time.
✔✔ Do not leave appliances on standby
5% of your power bill is used to run electrical appliances on standby. If a LED
light is on, your appliance is using energy. ✔✔ Switch off lights in empty rooms
You could cut your lighting costs by as much as 15% just by making sure you
turn off lights in rooms and corridors that are not in use. ✔✔ Don’t turn up the heating unless you really need to
Unless it’s just too cold for comfort, try to keep your thermostat at 19°C. Your heating costs go up by 8% each time you increase the temperature by just one degree
✔✔ Jazz up your hot water tank with a jacket
Insulate your hot water tank with a jacket. It only costs a few pounds and,
with all the heat it traps in, it pays for itself within months. Fit one that is at least 75mm (3”) thick and you save a great deal of energy. If every UK
household would be fitted with an adequate tank-jacket tomorrow, we would save over £89 million in energy costs every year.
✔✔ Look for the logo
When you purchase new appliances, always look for the Energy Saving Recommended logo. Energy Saving Recommended appliances are the most
efficient in their category and could save you up to £37 a year. ✔✔ Keep twice as warm with double glazing
Double glazing cuts heat loss through windows by 50% and acts as an
insulator, in the same way as loft and wall cavity insulation, making your
heating more energy-efficient.
Sources: Energy Saving Trust, Carbon Trust, DEFRA
www.philips.com | u |
4222.200.0135.2 |
