Philips HP6326PB manual Maintenance Instructions, After Each USE

8.

3Lift your arm until skin under arm stretches slightly. B For shaving other sensitive areas, stretch skin taut with

your fingers.

4 Hold Razor so that Shaving Head is in full contact with the skin. Shave with gentle strokes, using light pressure (Fig. 7).

B Pressing too hard may cause skin irritation, and Razor will not function properly.

5Do not use deodorant or alcohol-based lotions immediately before or after shaving.You may, however, want to use talcum powder.

6To turn Razor Off, depress small Safety Button in the center of the Bodyselect Switch and push the Switch down to the center, Off, position.

MAINTENANCE INSTRUCTIONS

IMPORTANT

BIt is recommended that you replace your shaving foil once a year.

BSwitch Razor Off and remove Charging Base from

electrical outlet before cleaning.

BNever clean, remove, or replace Shaving Head while motor is on.

BDo not apply pressure or touch Shaving Head with hard objects as this may dent or damage foil or trimmers.

If damage occurs, replace foil.

BCheck foil regularly.

BNever use a razor with a damaged or broken foil.

9.

BFor best shaving performance, it is suggested to lightly oil Shaving Head regularly by spreading a drop of light sewing machine oil over the foil and trimmers (Fig. 10).

If this does not improve the performance of your razor, it may be time to change foil.

BNever immerse Charging Base in water or other liquid. You may clean by wiping with a damp cloth.

A. AFTER EACH USE

After each use, Razor should be quickly cleaned by rinsing under running water or dipping and shaking gently in water.

IMPORTANT: DO NOT keep Razor submerged in water for long period of time.

B.ONCE A MONTH – CLEANING SHAVING HEAD

IMPORTANT:

DO NOT apply pressure to Shaving Foil.

1To remove Shaving Head, simultaneously press in small

buttons on both sides of Razor on Angled Shaving Head while pulling head up and out (Fig. 11).

BHold Shaving Head by plastic housing only – Shaving

Foil is very delicate and should not be handled. If foil becomes worn or damaged, replace it.

2Hairs can be removed from Shaving Head housing by using a soft brush or by lightly blowing out hairs.

NOTE: Avoid using brush on Shaving Foil as this may cause damage.