To remove the brush from the hair

-It is not necessary to rotate the brush in the opposite direction. Simply push and turn the bristle retraction knob in the direction of the arrows (fig. 10) and the bristles will retract.

-Slide the metal bar sideways out of the curl.

This will prevent the curl from getting spoilt or tangled and makes it last longer.

Cleaning

The brushes can be cleaned with a small brush or a dry cloth.

Storage

The appliance can be hung from the hanging loop (fig. 11).

11

Important

Before connecting the appliance, check that the voltage(s) indicated on the type plate correspond(s) to the local mains voltage. Also check whether the Voltage Selector is positioned in the correct voltage corresponding with the local mains voltage.

Do not use this product near water in e.g. baths, washbasins, sinks. If the product falls into water, unplug it immediately and dispose of it. It must not be used again.

Always ensure that the attachments are completely dry (on the inside as well as the outside!) before affixing them to the styler.

Always switch the appliance off before putting it down, even if it is only for a moment.

For additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is advisable in the electric circuit supplying the bathroom. Ask your electrician for advice.

6

Page 6
Image 6
Philips HP 4621 manual Cleaning, Storage