4Use your SoundBar
This section helps you use the SoundBar to play audio from connected devices.
Before you start
•Make the necessary connections described in the quick start guide and the user manual.
•Switch the SoundBar to the correct source for other devices.
Adjust the volume
1 Press VOLUME +/- to increase or decrease a volume level.
•To mute sound, press 
(MUTE).
•To restore the sound, press 
(MUTE) again or press VOLUME
»»All Source indicators on the main unit blink twice when a volume is set to the maximum or minimum value.
Choose your sound
This section helps you choose the ideal sound for your video or music.
Surround sound mode
Experience an immersive audio experience with surround sound modes.
1 Press SURR to select a surround mode.
•[Virtual Surround]: Creates a highly surround listening experience The SURR indicator on the main unit lights up.
•
Equalizer
Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.
1 Press TREBLE +/- or BASS +/- to change
the frequency.
»»All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value.
MP3 player
Connect your MP3 player to play your audio files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable, connect the MP3 player to the
2 Press
3 Press the buttons on the MP3 player to select and play audio files or music.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.
What you need
• A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 2.1 + EDR.
• The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
1 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode.
»»The Bluetooth indicator blinks at a fast rate.
EN 7
