Philips HTL3120 user manual Play audio through Bluetooth, Auto standby

3 Use the remote control to control play.

Button Action

Start, pause or resume play.

Press and hold to stop play.

/ Skip to the previous or next track.

Select or turn off repeat/shuffle (Repeat) mode.

Note

•• This product may not be compatible with certain types of USB storage device.

•• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized.

•• Digital camera PTP protocols are not supported.

•• Do not remove the USB storage device while it is being read.

•• DRM-protected music files (MP3, WMA) are not supported.

•• Support a USB port: 5V , 1A.

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.

What you need

• A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 3.0 + EDR.

• The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).

1 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode.

»»bt is displayed on the display panel, blinking.

2 On the Bluetooth device, switch on Bluetooth, search for and select Philips HTL3120 to start connection (see the

user manual of the Bluetooth device on how to enable Bluetooth).

»»During connection, bt on the display panel blinks.

3 Wait until you hear a beep sound from the SoundBar.

»»When the Bluetooth connection succeeds, bt is displayed on the display panel without blinking.

»»If the connection fails, bt on the display panel blinks continuously.

4 Select and play audio files or music on your Bluetooth device.

	• During play, if a call is coming, music
	play is paused. Play resumes when the
	call ends.
	• If your Bluetooth device supports
	AVRCP profile, on the remote control
	you can press		/ to skip to a track,
5	or press	to pause/resume play.
	To exit Bluetooth, select other source.

•When your switch back to Bluetooth mode, Bluetooth connection remains active.

Note

•• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.

•• If you want to connect your SoundBar with another Bluetooth device, press and hold Bluetooth on the remote control to disconnect the currently connected Bluetooth device.

•• Philips does not guarantee 100% compatibility with all Bluetooth devices.

Auto standby

When playing media from a connected device, the SoundBar automatically switches to standby if:

• no button is pressed for 29 minutes, and

EN 11