Philips HTS3019/12 user manual Sync audio output with video play, Repeat play a specific section

Tip

• You can change the PBC setting (see ‘Adjust settings’

> ‘Preferences’ > [PBC]).

Sync audio output with video play

If the video play is slower than the audio output (sound does not match with the pictures), you can delay the audio output to match the video.

1 Press and hold AUDIO SYNC until ‘AUDIO SYNC XXX’ is displayed. ‘XXX’ denotes the delay time.

2 Within five seconds, press VOL +/- to set the delay time for audio output.

Note

•If the volume control is not used within 5 seconds, it resumes normal volume control function.

Repeat play a specific section

1 During play, press REPEAT A-B where you want to set as the starting point.

2 Press REPEAT A-B again to set the ending point.

»Repeat play starts.

3 To cancel repeat play, press REPEAT A-B again.

Note

•The marked section for repeat play is only possible within a track/title.

18EN

View video play from different camera angles

1 During play, press ANGLE repeatedly to display the angle options.

»Play changes to the selected angle.

Note

•Applicable only to discs containing multi-angle scenes.

Quick skip play to a specific time

1 During play, press INFO.

»The disc status menu is displayed.

2 Press to view information, then press OK.

•[TT Time] (title time)

•[Ch Time] (chapter time)

•[Disc Time] (disc time)

•[Track Time] (track time)

3 Press the Numeric buttons to enter the time where you want to skip to, then press OK.

Note

•The options are different depending on the disc type.