Philips HTS3051B/F7, HTS3051B/F8 manual 40 EN

LIST OF SETTINGS

Advanced Setup

Category		Menus / Options				Description
Audio	Night Mode	On				Compresses range between soft
						and loud sounds.
		Off
						“On”:
						Activates the Night Mode.
						“Off”:
						Deactivates the Night Mode.
	Blu-ray Disc Audio	Mix Audio Output				“Mix Audio Output”:
		Primary Audio Only				The audio for the secondary video
						and the interactive application will
						be output together with the audio
						for the primary video.
						“Primary Audio Only”:
						Only audio for the primary video
						will be output.
						When playing back a BD-video which
						only contains primary audio, the
						audio output will be the same case
						as “Primary Audio Only” even if the
						“Blu-ray Disc Audio” is set to “Mix
						Audio Output”.
	Audio Output*	Speakers				“Speakers”
	• Refer to page 45 for	HDMI Normal				Audio will be output from the
	more information.	HDMI LPCM				5.1ch speakers.
						“HDMI Normal”
						The Multi-channel audio signals
						are output from HDMI OUT jack
						with Bitstream or LPCM depending
						on the material.
						“HDMI LPCM”
						The Multi-channel or stereo audio
						signals are output from HDMI OUT
						jack with LPCM.
	Speaker Setup	Surround Effects	Center	0 ~ 7	default is 3	Adjust the sound balance between
	• This feature is	• Sets the surround	Width			center and front speakers.
	available only when	effect of audio when	Dimension	-3~ 3	default is 0	Adjust the sound balance between
	“Audio Output” is set	the setting of				front and rear speakers.
	to “Speakers”.	surround mode is set	Panorama	On		“On” :
	(Refer to page 45.)	to “Dolby Pro Logic II
						Sets the sound of center speaker to
		Movie” or “Dolby Pro		Off
						have surround-sound effect.
		Logic II Music”.
						“Off” :
		(Refer to “Selecting
						Sets the sound of center speaker to
		Surround Mode” on
						normal.
		page 53.)
		Speaker Distance	Unit	Feet		Sets the unit of measure for
				Meters		“Speaker Distance”.
			Front (L/R)	Feet :	default is 3	Sets the distance from the listening
			Center	0 ~ 15	default is 3	point to each speaker to get the
			Surround	Meters :	default is 3	ideal delay time.
				0 ~ 4.5		• If you change the setting of
						“Front (L/R)”, the setting of
						“Center” and “Surround” will be
						set to the same setting
						automatically.
						• If you set “Front (L/R)” to 0 ft (0m),
						you can only select 0 ft (0m) for
						“Center” and “Surround”.
						• Difference of the values among
						“Front (L/R)” and “Center” cannot
						exceed 5 ft (1.5m).
			Default	Yes		Sets all speaker distance settings to
						the default setting.
				No

40 EN