SETUPS
Software Upgrade
Philips continuously tries to improve its products and we strongly recommend that you update the software when updates are available.
New software can be downloaded from our website at www.philips.com using the type number of your Home Theater System (e.g. HTS3051B) to find information.
Disc Upgrade
| |||
home A“Settings” A |
You can upgrade the software by using disc.
1)Follow steps 1) to 3) in “Connection Test” on page 48.
2)Use [K / L] to select “Software Upgrade”, then press [OK].
3)Use [K / L] to select “Disc Upgrade”, then press [OK].
4)Use [K / L] to select “Yes”, then press [OK].
5)Disc tray will open automatically.
•Insert the disc for software upgrade and then press [A (open/close)].
6)After completing loading disc, confirmation message will appear. Use [s / B] to select “Yes” and press [OK] to start upgrading.
•It may take a while to complete the upgrading.
7)After the disc upgrade finishes, this unit will restart and open the disc tray automatically. Remove the disc.
•Please visit www.philips.com to download the latest firmware version.
•Please do not unplug the AC power cord while executing the “Disc Upgrade”.
•All settings will remain the same even if you upgrade the firmware version.
Network Upgrade
| |||
home A“Settings” A |
You can upgrade the software by connecting the unit to the Internet.
1)Follow steps 1) to 3) in “Connection Test” on page 48.
2)Use [K / L] to select “Software Upgrade”, then press [OK].
3)Use [K / L] to select “Network Upgrade”, then press [OK].
4)Use [K / L] to select “Yes”, then press [OK].
•This unit will then start checking for the latest firmware version.
5)Confirmation message will appear.
Use [s / B] to select “Yes”, then press [OK].
•The unit will start downloading the latest firmware version.
6)When the download completes, confirmation message will appear. Press [OK].
•The unit will start upgrading the firmware version.
•It may take a while to complete the upgrading.
7)After upgrading finishes, this unit will restart and open the disc tray automatically.
•In order to upgrade the software via the Internet, you must connect the unit to the Internet and set up necessary settings.
•For the network connection, refer to “Network Connection with LAN” on page 22.
•For the network setup, refer to “Network Connection” on page 48.
•Please do not unplug the AC power cord or LAN cable while executing the “Network Upgrade”.
•All settings will remain the same even if you upgrade the software version.
•The disc tray will open automatically after upgrading finishes. This is not a malfunction.
Reset to Factory Default
Initialize the setting, SD Memory Card or network setting.
1)Use [K / L] to select “Settings” in the home menu, then press [OK].
2)Use [K / L] to select “Factory Default”, then press [OK].
3)Use [K / L] to select the desired setting, then press [OK].
All the settings except for the “Ratings Lock” and “Network Connection” setting will be reset to default.
“Format SD Card” (Available only when an SD Memory Card is inserted):
Initialize the SD Memory Card.
Local storage for Player or SD card (Available only when an SD Memory Card is inserted) used for
Reset the network setting to the default.
4)Use [K / L] to select “Yes”, then press [OK].
•Confirmation message will appear. Press [OK] to complete the setting.
5)Press [BACK U] to go back to the previous screen, or press [
(home)] to go back to the home menu.
•Do not remove the SD Memory Card while executing the “Format SD Card” or “Local Storage” (SD card). It will damage the card.
•“Format SD Card” and “Local Storage” (SD card) are not available when a