Philips HTS3264D quick start Connect Set up

1

Connect

2

Set up

APlacement

Proper speakers system placement is important to ensure optimum sound performance.

REAR	FRONT
LEFT	LEFT	CENTER
			FRONT
			RIGHT

CConnect the speakers and subwoofer

Connect the various colored plugs from the speakers and subwoofer to the same colored jacks at the rear of the main unit.

	FRONT CENTER		SUBWOOFER
FRONT	FRONT	REAR	REAR
RIGHT	LEFT	RIGHT	LEFT

DConnect the radio antenna and power cable

Keep the antennas away from the electronic devices to prevent unwanted interference.

FM antenna

A

B

AFinding the viewing channel

APress 2 (Standby-On) on the main unit to turn it on.

BTurn on the TV. Use the TVs remote control to select the correct viewing channel.

Standby button

Main Unit (Front)

REAR	SUBWOOFER	Main Unit (rear)	Note To search for the correct viewing channel,
RIGHT			press the Channel Down button on the TVs remote
		A Connect the FM antenna (supplied) to the inner pin	control repeatedly (or AV, SELECT, ° button) until
A Place the centre speaker above or close to the TV.		of the FM 75 ￿ jack. (For some models, it has been	you see the Video In channel. If you are using a RF
		connected in the factory.) Extend the wire for	modulator, set the TV to channel 3 or 4.
B Place the subwoofer on the floor, at least one metre
		optimum reception.
away from the TV.		B Connect the power cable from the main unit to the
C Place the front speakers at equal distances from the
		AC power outlet.	B Select the display language on the
TV.
D Place the rear speakers at the back or beside the			screen
listening position.		E Connect audio output from TV	A Press OPTIONS.
		(optional)	The { General Setup } appears.
		Main Unit (rear)	B Press .
B Connect the main unit to TV		To hear the TV audio through this unit, use a red and
		white audio cables (not supplied) to connect the AUDIO
	Television (rear)	IN-AUX jacks on the main unit to the AUDIO OUT	General Setup
		jacks on your TV.
			Disc Lock
VIDEO IN
(CVBS)			Display Dim

AUDIO	OSD Language	English
	Screen Saver
OUT		Français

SleepEspañol

		DivX(R) VOD Code
VIDEO IN	AUDIO OUT
(CVBS)
	AUDIO
	OUT
	AUDIO IN	Press OPTIONS to exit menu
	TV (rear)
	C Use	keys to select { OSD Language } and press
	.

Main Unit (rear)

zUse the supplied composite video cable to connect the CVBS jack on the main unit to the VIDEO IN jack on your TV.

Note It is important to connect the main unit directly to your TV.

Main Unit (rear)

Note When watching the TV programs, you can press AUX (MP3 LINK) repeatedly on the remote control until ‘AUX 1’ or “AUX 2’ is displayed to get the sound output from the speakers.

D Use keys to select a language option in the menu and press OK to confirm.

EPress OPTIONS to exit.

Note The language set here is only for the menus that are shown on the TV while operating this Home Theatre system, not for the DVD disc menu.

There are various setup options (Audio Setup, Video Setup, Preferences) available on this Home Theatre System. Refer to the user manual for more information.

hts3264D_37_qsg_eng2_final811.in2 2 20082008--0303--1313 11:19:2211:19:22 AMAM