Philips HTS3545/37 quick start Connect, Set up

1Connect

APlacement

Proper speakers system placement is important to ensure optimum sound performance.

REAR	FRONT
LEFT	LEFT	CENTER
		FRONT
		RIGHT
	REAR	SUBWOOFER
	RIGHT

A	Place the center speaker above or close to the TV.
B Place the subwoofer on the floor, at least one meter
	away from the TV.

CConnect the speakers and subwoofer

Connect the various colored plugs from the speakers and subwoofer to the same colored jacks at the rear of the main unit.

SUBWOOFER

FRONT CENTER

	FRONT	REAR	REAR
		RIGHT	LEFT
FRONT	LEFT
RIGHT

DConnect the radio antennas and power cable

Keep the antennas away from the electronic devices to prevent unwanted interference.

FM antenna

A

Main Unit (rear)

SIRIUS

B

AM/MW antenna

2Set up

AFinding the viewing channel

APress 2 (STANDBY ON) on the main unit to turn it on.

BTurn on the TV. Use the TVs remote control to select the correct viewing channel.

STANDBY-ON

Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. If you are using a RF modulator, set the TV to channel 3 or 4.

C Place the front speakers at equal distances from the

TV.

D Place the rear speakers at normal listening ear level.

BConnect the main unit to TV

Main Unit (rear)

A Connect the FM antenna to the inner pin of the

FM 75 ￿ jack. Extend the wire for optimum

reception.

B Unfold the AM/MW loop antenna (not supplied) and

fix the claw into the slot. Push the tabs and insert

the wires into the AM/MW jacks.

C Connect the power cable from the main unit to the

AC power outlet.

BSelect the display language on the screen

APress SETUP.

The { General Setup Page } appears.

General Setup Page

VIDEO IN

(CVBS)

VIDEO IN

(CVBS)

Television ( rear)

SIRIUS

EConnect audio output from TV

(optional)

To hear the TV audio through this home theater system, use a red and white audio cables (not supplied) to connect the AUDIO IN-TV jacks on the main unit to the AUDIO OUT jacks on your TV.

	Disc Lock
	Display Dim
	Program
	OSD Language	English
	Screen Saver
		Espanõl
	Sleep	Français
SETUP	DivX(R) VOD Code

B	Press	to select { OSD Language } and press .
C	Use	keys to select a language option in the

	DOCK
CVBS	VIDEO OUT
	Pr
	Main Unit (rear)
	Pb
S-VIDEO	COAXIAL

zConnect a composite video cable (supplied) from the CVBS jack on the main unit to the VIDEO IN jack on your TV.

Note It is important to connect the main unit directly to your TV.

OUT	Television
AUDIO

( rear)

AUDIO OUT

AUDIO

OUT

AUDIO IN

Main Unit (rear)

Note When watching the TV programs, you can press TV on the remote control to get the sound output from the speakers.

menu and press OK to confirm. D Press SETUP to exit.

Note The language set here is only for the menus that are shown on the TV while operating this Home Theater system, not for the DVD disc menu.

There are various setup options (Audio Setup, Video Setup, Preference Setup) available on this Home Theater System. Refer to the user manual for more information.

hts3545_37qsg_eng2.indd 2 20072007--0404--3030 3:24:563:24:56 PMPM