Philips HTS3610/51 quick start Position Speakers Subwoofer, Fix Antennas, Connect DVD system to TV

Position Speakers &

Subwoofer

1 Place centre speaker on or close to the TV.

2 Place subwoofer on the floor.

3 Place front speakers equal distance from the TV and angle them 45 degree to the listener.

4 Place rear speakers facing the listener, equal distance on the left and right.

Fix Antennas

1 Connect the FM antenna to the FM socket, extend the antenna and fix it on the wall.

DVD System (back)

2 Unfold the AM/ MW loop antenna and fix the claw into the slot.

3 Push back tab and insert each wire into slot.

DVD System (back)

Connect Speakers &

Subwoofer to DVD System

Connect the various coloured plugs from the speakers and subwoofer to the same colour socket on the rear of DVD system.

Front				Front
Speaker		Centre	Speaker
(right) Sub-Woofer	Speaker				(left)

Rear	DVD System (back)	Rear
Speaker		Speaker
(right)		(left)

Connect DVD system to TV

1 Use the supplied black Scart cable to connect the SCART socket on the rear of the DVD system and the SCART input socket at the rear of the TV.

2 Plug in the power cable of the DVD system to an AC outlet.

Tip To connect other devices to the DVD system, refer to the use manual.

Television (back)

SCART IN

SCART IN

To antenna or set-top box

DVD System (back)

SCART

SCART

Insert Batteries in

Remote Control

1Remove batteries compartment cover.

2Insert the provided batteries in the remote control.Take note of where the positive and negative ends should go.

3Replace the batteries compartment cover.

Remote Control (back)

Find Correct Viewing Channel

1Press STANDBY-ON on the DVD system’s remote control.

2Press DISC on the remote control until ‘DISC’ appears on the front panel.

3Switch on the TV.

4 Press ‘0’ on the TV’s remote control, then repeatedly press the Channel Down button until you see the DVD background screen. This is the correct viewing channel for the home theatre system.

Tip For some TVs, to find the correct viewing channel, you can keep pressing the AV or the SELECT buttons. If still unable to find the

correct viewing channel, check the connections again or check your TV’s user manual.

MW loop

antenna