Philips HTS5310S/75 Playing discs, Basic playback controls, Auto Eco Power standby mode

Disc Operations (continued)

E n g l i s h

Playing discs

1Press SOURCE control until “DISC” appears on the display panel (or press DISC on the remote).

2Turn on the TV power and set to the correct Video In channel. (See page 19 “Setting the TV”).

➜ You should see the blue DVD background screen on the TV.

3Press OPEN CLOSE 0 to open the disc tray and load a disc, then press the same button again to close the disc tray. ➜ Make sure the disc label is facing up. For double-sided discs, load the side you want to play facing up.

4Playback will start automatically.

➜If a disc menu shows on the TV, see page 23 “Using the Disc Menu”.

➜If the disc is locked by parental control, you must enter your six-digit password. (See pages 36~37).

Auto Eco Power standby mode

This is a power-saving feature, the system will automatically switch to Eco Power standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing.

Basic playback controls

Pausing playback

●During playback, press 2; (or ; on the remote).

➜ To resume normal playback,

press 2; (or PLAY B on the remote).

Selecting another track/chapter

●Press S / T or use the numeric keypad (0-9)to key in a track/chapter number.

➜ If repeat track mode is active, pressing S / T will replay the same track/ chapter.

Searching backward/forward

●Press and hold S / T.

To resume normal playback, press 2; (or PLAY B on the remote).

➜ While searching, pressing S / T again will decrease/increase the search speed.

Stopping playback

●Press Ç.

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.

22

001-051-hts5310S-75-Eng6 22 15/06/05, 1:19 PM