EN |
| Advanced Settings |
|
| |
| Unregistration | |
To unregister a handset
1.Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Unregistration and press mSELECT.
2.Enter the Master PIN when prompted and press mOK to confirm.
3.Select in the list of handsets displayed, the handset that you wish to unregister.
A validation tone is emitted to indicate successful unregistration and the screen shows Unregistered.
If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to
Change Master PIN
The Master PIN is used for setting call barring/baby call number, registration/unregistration of handsets and for accessing the answering machine remotely. The default Master PIN number is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.
To change Master PIN
1.Press mMENU, scroll :to Advanced Set and press mSELECT, scroll :to Change PIN and press mSELECT.
2.Enter the current Master PIN when prompted and press mOK to confirm. The PIN entered will be shown as asterisks (*) on the screen.
If an incorrect PIN is entered, the screen returns to previous menu.
3.Enter new PIN and press mOK.
4.Enter new PIN again and press mOK to confirm PIN change.
A validation tone is emitted, the message New PIN Stored appears and the screen returns to previous menu.
Reset
Reset to default settings
1.Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Reset and press mSELECT.
2.Scroll : to Yes and press mSELECT.
A validation tone is emitted and the unit is reset to its default settings (Please see "Default settings" on page 19).
The WELCOME mode will appear again after master reset.
42
