1Insert the mains lead into the projectors Mains inlet socket and connect it to the wall socket.
– The Standby indicator (on the yStandby button) lights up red,the projector is now in the
Power/Standby mode.
2Remove the lens cap.
3Press the y Standby button on projector or any key on the remote control to switch on
the projector.
– The Standby indicator starts blinking green.
– When the projection lamp is on,the Standby indicator lights up green and the star t-up
screen appears for several seconds.
4Press the y Standby button to switch the projector back into the Power/Standby mode.
– The Standby Warning screen will appear for 20 seconds.
• The Standby Warning screen can be removed by pressing the OK button.
5Press the y Standby button again to confirm.
– The projector will now go into Power/Standby mode.
You can also press the Standby button twice in succession to switch the projector into Power/Standby
mode immediately.
Switching on the projector
Philips Home Cinema Projector 16 English User guide LC 6281 / LC 6285
3. Set up >STANDBY/ON
Lens axis
Screen 16:9
Lens offset (%)
Image
offset
(cm)
100%
Distances/sizes picture LC 6285
Picture
size table Wide* Tele*
Projection Image Image Image Image Image Image Image
distance Diagonal Diagonal Width Height offset Diagonal Diagonal
(m) (inches) (cm) (cm) (cm) (cm) (inches) (cm)
1,2 39 98 85 48 24 31 79
1,5 48 122 107 60 30 39 98
2,0 64 163 142 80 40 52 131
2,5 80 204 178 100 50 65 164
3,0 96 245 214 120 60 78 197
3,5 112 286 249 140 70 90 230
4,0 129 327 285 160 80 103 262
4,5 145 367 320 180 90 116 295
5,0 161 408 356 200 100 129 328
5,5 177 449 391 220 110 142 361
6,0 193 490 427 240 120 155 394
7,0 225 571 498 280 140 181 459
8,0 257 653 569 320 160 207 525
9,0 289 735 641 360 180 233 591
10,0 321 816 712 400 200 258 656
11,0 354 898 783 440 220 284 722
12,0 386 980 854 480 240 310 787
15,0 482 1225 1068 600 300 388 984
*With the Zoom ring you can enlarge (wide) or reduce (tele) the size of the projected image.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 16