Philips MC150/21 manual Basic Functions, Switching the system on, Adjusting volume and sound

Basic Functions

IMPORTANT:

Before you operate the system, complete the preparation procedures.

Switching the system on

●Press STANDBY-ON(y on the remote control) or SOURCE.

➜ The system will switch to the last selected source.

Adjusting volume and sound

1Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to increase or decrease volume.

➜Display shows the volume level Uo and a number from 0-32.

2Press DBB 1 or DBB 2 (DBB on the remote control) to switch bass enhancement on or off.

➜Display shows: or if the DBB is activated.

3 Press MUTE on the remote control to stop sound play- back instantly.

➜Playback will continue

without sound and the display

shows .

●To start sound playback you can:

–press MUTE again;

–adjust the volume controls;

–change source.

English

●Press SOURCE (CD, TUNER or TAPE on the remote control).

➜ The system will switch to the selected source.

To switch the system to standby mode

●Press STANDBY-ON(y on the remote control).

●If in tape mode or recording mode, press STOP•OPEN first.

➜ The volume level (up to maximum volume level of 20), interactive sound settings, last selected source and tuner presets will be retained in the player's memory.

Power-saving automatic standby

The power-saving feature automatically switches to standby 15 minutes after a tape or CD playback has ended and no control is operated.

11