Philips MC235 user manual Troubleshooting, Problem, Solution, E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem		Solution
CD OPERATION
	“NO DISC” is displayed.	– Insert a disc.
		– Check if the disc is inserted upside down.
		– Wait until the moisture condensation at the lens
		has cleared.
		– Replace or clean the disc, see “Maintenance”.
		– Use a finalised CD-RW or CD-R.
RADIO RECEPTION
	Radio reception is poor.	– If the signal is too weak, adjust the antenna or
		connect an external antenna for better reception.
		– Increase the distance between the Micro HiFi
		System and your TV or VCR.

E n g l i s h

GENERAL

The system does not react when buttons	– Remove and reconnect the AC power plug and
are pressed.		switch on the system again.
Sound cannot be heard or is of poor	–	Adjust the volume.
quality.	–	Disconnect the headphones.

– Check that the speakers are connected correctly.

– Check if the stripped speaker wire is clamped.

The left and right sound outputs are reversed.

– Check the speaker connections and location.

The remote control does not function	–	Select the source (CD or TUNER, for example)
properly.		before pressing the function button (ÉÅ,í,
		ë).
	– Reduce the distance between the remote control
		and the system.
	– Insert the batteries with their polarities
		(+/– signs) aligned as indicated.
	–	Replace the batteries.
	– Point the remote control directly toward
		IR sensor on the front of the system.
The timer is not working.	–	Set the clock correctly.
	–	Press TIMER to switch on the timer.

The Clock/Timer setting is erased.

–Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

19