Basic Operations
English
Switching on/off
Switching to active mode
●Press CD, TUNER, AUX or
USB PC LINK.
Switching to Eco Power standby mode
●Press B.
➜ECO POWER button lights up.
➜The display screen will go blank.
Switching to standby mode (view clock)
●Press and hold B.
➜The clock is displayed.
➜While in standby mode, pressing CLOCK•TIMER button will switch the system to Eco Power standby mode.
Note:
–Before switching the system to Eco Power standby or standby mode, make sure the demonstration mode has been deactivated.
Demonstration mode
If the demonstration mode is active, whenever you switch the system to Eco Power standby or standby mode, it will begin showing the various features offered by the system.
To activate the demonstration
●In Eco Power standby/standby mode, press and hold Ç on the main unit until "DEMO ON" is displayed.
To deactivate the demonstration
●Press and hold Ç on the main unit until "DEMO OFF" is displayed.
Setting the clock
The clock can be set in either
4 (00:00 / 12:00AM)
3 (00:00 / 12:00AM)
2 (00:00 î12:00AM)
1, 5
1 Press and hold CLOCK on the remote until the time flashing on the display.
OR
Press and hold CLOCK•TIMER on the
main unit until "SELECT CLOCK OR TIMER" is displayed. Then press ë to change the display to “CLOCK” and press CLOCK•TIMER again to confirm.
2Press PROGRAM (PROG) repeatedly to change between
3Press à or á repeatedly to set the hour.
4Press í or ë repeatedly to set the minute.
5Press CLOCK (or CLOCK•TIMER) to store the setting.
➜ The clock will start working.
Notes:
–The clock setting will be erased when the system is disconnected from the power supply.
–The system will exit clock setting mode if no button is pressed within 90 seconds.
14
