Philips MCD122 user manual Get started, Connect power, Prepare the remote control

Connect power

8

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.

Before connecting the AC power cord, ensure you have completed all other connections.

1Connect the AC power cord to the wall socket.

4 Get started

English

Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus.Write the numbers here:

Model No. ____________________________

Serial No. _____________________________

Prepare the remote control

Caution

Risk of explosion! Keep batteries away from heat,

1Remove the protective tab to activate the remote control battery.

To replace the remote control batteries:

1Open the battery compartment.

2Insert one lithium CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

Note

Before you press any function button on the remote

control.

If you are not going to use the remote control for a long time, remove the battery.

EN 13