Philips PDCC-JS/JW-0807 Setting the clock, Setting DVD menu options, detailed descriptions

Setting the clock

1

In standby mode, press and hold CLOCK on the remote control.

2

When the hour digits flash, press VOLUME-/+(VOL+/- on the remote control) to set the hours.

3

Press CLOCK again and the minute digits flash.Then press VOLUME-/+(VOL+/- on the remote) to set the minutes.

4

Press CLOCK again to confirm the time setting.

Setting DVD menu options

IMPORTANT!

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan.

	STANDBY-ON
ANALOG AUDIO SETUP	SLOW
DIGITAL AUDIO SETUP
	PICTURE SETTING
3D
DIVX (R) VOD
	ANGLE
	DISPLAY
	MUTE

Tip

See chapters "Preparations" and "System

Menu Options" in the User Manual for

detailed descriptions.

RDS