Playing a disc
1
Press OPEN•CLOSE 0 to open the disc tray and load in a disc, then press the same button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
2
Playback will start automatically. If not pressÉÅ.
3
To stop playback, press 9.
Programming and tuning to radio stations
1
Press SOURCE (TUNER on the remote) to select tuner source.
2
Press PROG/ANGLE for more than two seconds to program all available stations in order of waveband.
3
Press PRESETí/ë until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the accompany owner's manual.
Playing a USB mass storage device
With the
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to work with this
1
Insert the USB device’s USB plug into the socket 
on the front panel of the main set.
2
Press SOURCE (or USB/AUX on the remote control) once or more to select USB.
3
Play the USB’s audio files as you do with the albums/tracks on a CD.
CRoyal Philips Electronics N.V. 2007 All rights reserved.
http://www.philips.com |
