Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK/RDS on the remote control.
When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the
remote control to set the hours.
Press CLOCK/RDS again and the minute digits flash. Then turn VOLUME-/+ on the
system or press VOLUME+/- on the remote control to set the minutes.
Press CLOCK/RDS again to confirm the time settings.
Setting DVD menu options
IMPORTANT!
For instances whereby the progressive scan feature is activated but the connected
TV does not support progressive signals, or when the cables have not been
appropriately connected, refer to the User Manual for proper progressive scan
setup or deactivate the progressive scan feature as below:
1) Turn off the TV progressive scan mode or turn on the interlaced mode.
2) Press SYSTEM on the remote control to exit the system menu, then press DISC
to exit progressive scan.
Tip
Refer to chapters "Getting Started" and "System Menu Options" in
the User Manual for detailed descriptions.
MCD708 QUG_Eng-22 2006.10.27, 16:203