Philips MCM108DB/37 Basic Functions, Switching the system on, Power-savingautomatic standby

English

Basic Functions

				O	E
					PEN / CLOS
STANDBY-ON	SOURCE	BAND	PROG/CLOCK	- VOLUME	+	TUNING

IMPORTANT:

Before you operate the system, complete the preparation procedures.

Switching the system on

●In Active standby, or Eco standby, press STANDBY-ON(y on the remote control).

➜The system will switch to the last selected source.

●Press SOURCE (CD, TUNER or DOCK on the remote control).

➜The system will switch to the selected source.

To switch the system to standby mode

●Press STANDBY-ON(y on the remote control).

➜ The clock is displayed.

To switch the system to Eco-power standby mode

●Press and hold STANDBY-ON(y on the remote control) for more than 2 seconds. ➜ The clock is displayed.

Power-saving automatic standby

The power-saving feature automatically switches to Eco power standby 15 minutes after a CD playback has ended and no control is operated.

Note:

–In the Eco power standby, no button, except SOURCE, and STANDBY-ONbuttons, can

be activated.

Adjusting volume and sound

1Press VOLUME – /+ to increase or decrease volume.

➜ Display shows the volume level and a number from 0-32.

2 Press DSC repeatedly to	VOLUME
select the desired sound effect:
JAZZ / POP / CLASSIC /	DBB DSC
ROCK.

3Press DBB (on the remote control) to switch bass enhancement on or off.

➜ Display shows: DBB if the DBB is activated.

4Press MUTE on the remote control to stop sound play-back instantly.

➜ Playback will continue without sound and the display shows MUTE .

●To start sound playback you can:

–press MUTE again;

–adjust the volume controls;

–change source.

14